Restore To Factory Configuration; Hardware Installation Procedures - Netis WF2411 User Manual

Description
Connect to Power adapter, please don‟t use the unknown
PWR
power adapter, otherwise your device may be damaged.
Default Restore settings
"WPS" Encryption button
WPS
WAN Internet access
LAN Connect with computer NIC or Ethernet device

2.3. Restore to factory configuration

If the router ever freezes in a setting change process or if you can‟t access it because you can‟t
remember the IP you have given it or other problem, you may have to utilize the reset button on
the back of the router to put it back to factory settings. You have to press and hole this button
for a few seconds (2-6s) with a pencil when it is working, then release and it will restore
settings to the factory configuration.
The other way to restore factory settings is through the same user interface used in setup.
Click on „System management‟- „Restore‟, and click on the „Restore‟ button.

2.4. Hardware Installation Procedures

The procedures to install the 150Mbps Wireless-N AP/ Repeater / Router client pleaserefers to
the following picture
Figure 2-2
Function
10
WF2411