Advertisement
2Bsst SPECIFICATIONS:
Power Output: 100 watts per channel into 8 ohms
Input Impedance:
Sensitivity:
Distortion:
Noise:
Slew Rate:
Power Bandwidth:
Damping Factor:
Power consumption: idle 30va, maximum power 600va
Heat load:
Dimensions:
Weight:
10K ohms single ended (unbalanced)
15K ohms double ended (balanced)
2v setting
2 Volts in = 100 Watts into 8 ohms - gain 23 dB
1v setting
1 Volt in = 100 Watts into 8 ohms - gain 29 dB
THD+noise:
< 0.010% 20Hz to 20kHz at 100 watts into 8 ohms,
IMD:
< 0.010% 60Hz + 7KHz mixed 4:1
Measured with input shorted - 20Hz to 20kHz.
>108dB below rated output (with 20Hz to 22KHz bandpass filter)
>60 volts per microsecond
<1 Hz to over 100 kHz
Over 500 at 20 Hz, ref. 8 ohms
idle 100 btu/hr., max power 288 btu/hr
Regular model: Front Panel:
Body:
PRO model:
Front Panel:
Body:
approx. 28 lbs (12.7kg.)
2BSST
17.2" x 4"
16.9" wide X 3.5" high X 15.1" deep
(depth includes front panel and protrusion of rear panel connectors)
19" x 3.5" (2 rack units)
16.9" wide X 3.5" high X 15.1" deep
(depth includes front panel and protrusion of rear panel connectors)
3
TWO CHANNEL POWER AMPLIFIER
Advertisement
