Summary of Contents for AUDAC WX302/OB-OW
- Page 1 Outdoor Wall Speaker WX302/OB-OW AUDAC PROFESSIONAL AUDIO EQUIPMENT Outdoor Wall Speaker WX302/OB-OW User Manual & Installation Guide...
- Page 2 Warning Only use the correct amplifier output voltage and impedance. Exceeding these limits could cause fire or other failures. Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles. Only install the speaker in locations that can structurally support the weight of the speaker. Not doing so may result in the speaker falling down.
- Page 3 Once the bracket is mounted on the desired location, the loudspeaker can be fixed to the bracket. Connecting the loudspeaker On the rear side of the WX302/OB-OW is a special waterproof AWX-5 connector provided. This allows to connect the loudspeaker to the amplifier output. A special included connection cable should be used.
- Page 4 When the desired power tap is selected, the loudspeaker is ready to be used. Additional information WX302/OB-OW Technical specifications: RMS Power 60 W Max Power 30 W Nominal Impedance 8 Ohm Line transformer power tappings 500 Ohm / 20 W...
Need help?
Do you have a question about the WX302/OB-OW and is the answer not in the manual?
Questions and answers