American Hearth ALS18RV-1 Installation Instructions And Owner's Manual

American Hearth ALS18RV-1 Installation Instructions And Owner's Manual

Log set for unvented gas log heater or vented decorative appliance

Advertisement

Quick Links

RAVENWOOD
Installer:
Leave this manual with the appliance.
Consumer: Retain this manual for future reference.
WARNING: If the information in these instructions
are not followed exactly, a fire or explosion may re-
sult causing property damage, personal injury or
loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
— WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use
any phone in your building.
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier, call the
fire department.
— Installation and service must be performed by a
qualified installer, service agency or the gas sup-
plier.
INSTALLATION INSTRUCTIONS
AND OWNER'S MANUAL
GAS-FIRED
LOG SET FOR UNVENTED
GAS LOG HEATER
VENTED DECORATIVE APPLIANCE
STANDARD MODELS
ALS18RV-1
ALS24RV-1
ALS30RV-1
SELECT MODELS
ALS24RVS-1
ALS30RVS-1
Log sets comply with ANSI Z21.11.2 Unvented Heaters
and also comply with ANSI Z21.60 Decorative Vented
Appliances for Solid Fuel Burning Fireplaces. State or
local codes may only allow operation of log sets in a
vented configuration. Check your state or local codes.
WARNING: If not installed, operated and maintained
in accordance with the manufacturer's instructions,
this product could expose you to substances in fuel
or from fuel combustion which can cause death or
serious illness.
OR
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALS18RV-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for American Hearth ALS18RV-1

  • Page 1 INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL RAVENWOOD LOG SET FOR UNVENTED GAS LOG HEATER VENTED DECORATIVE APPLIANCE STANDARD MODELS ALS18RV-1 ALS24RV-1 ALS30RV-1 SELECT MODELS ALS24RVS-1 ALS30RVS-1 GAS-FIRED Installer: Leave this manual with the appliance. Consumer: Retain this manual for future reference.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Section Page Important Installation Guidelines .............. 3 General Information ................. 3 Requirements for Canada ................ 4 Log Identification - Standard Models ............5 Log Placement - Standard Models ............6-15 Log Identification - Select Models ............16 Log Placement - Select Models ............17-27 Ember Placement ..................
  • Page 3: Important Installation Guidelines

    IMPORTANT INSTALLATION GUIDELINES Proper Log Placement Any draft created around a vent-free log set can cause the Log placement is critical to proper burner performance. Logs flame to impinge on the log and create a sooting situation. must be correctly positioned onto the burner. The photos in WARNING: Do not allow fans to blow directly into the fireplace.
  • Page 4: Requirements For Canada

    REQUIREMENTS FOR CANADA This unit cannot be installed in a UNVENTED application, WARNING; DO NOT OPERATE THIS GAS LOG SET this unit can only be installed as a VENTED application WITH GLASS DOORS CLOSED with these requirements. • Clothing or other flammable material should not be IMPORTANT SAFETY INFORMATION placed on or near the appliance.
  • Page 5: Log Identification - Standard Models

    LOG IDENTIFICATION - STANDARD MODELS Part Number Front View Top View Description ALS18RV ALS24RV ALS30RV Log A R11864 R11872 R11877 Log B R11865 R11870 R11875 Log C R11866 R11871 R11876 Log D R11867 R11869 R11874 Log E R11879 R11879 R11879 Log F R11880 R11880...
  • Page 6: Log Placement - Standard Models

    LOG PLACEMENT - STANDARD MODELS Before you begin: Do not, handle these logs with your bare Attention: Do not use Figures 1 to order replacement logs. hands! Always wear gloves to prevent skin irritation. After Refer to Page 5, Log Identification-Standard Models, to handling logs, wash your hands gently with soap and water.
  • Page 7 LOG PLACEMENT - STANDARD MODELS 1. Place Log A onto rear left burner pin as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 7...
  • Page 8 LOG PLACEMENT - STANDARD MODELS 2. Place Log B onto right rear burner pin as shown below. TOP VIEW FRONT VIEW Page 8 33955-3-1115...
  • Page 9 LOG PLACEMENT - STANDARD MODELS 3. Place boss of Log C into the hole in Log B and onto the front two left burner pins. See image below. TOP VIEW FRONT VIEW 33955-3-1115 Page 9...
  • Page 10 LOG PLACEMENT - STANDARD MODELS 4. Place Log D onto the front two right burner pins as shown below. TOP VIEW FRONT VIEW Page 10 33955-3-1115...
  • Page 11 LOG PLACEMENT - STANDARD MODELS 5. Place Log E into the left slot in Log A as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 11...
  • Page 12 LOG PLACEMENT - STANDARD MODELS 6. Place Log F into slot created by Log A and Log C. See image below. TOP VIEW FRONT VIEW Page 12 33955-3-1115...
  • Page 13 LOG PLACEMENT - STANDARD MODELS 7. Place Log G onto boss on Log F and rest on log shelf as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 13...
  • Page 14 LOG PLACEMENT - STANDARD MODELS 8. Place Log H onto the boss on Log B as shown below. TOP VIEW FRONT VIEW Page 14 33955-3-1115...
  • Page 15 LOG PLACEMENT - STANDARD MODELS 9. Log assembly complete. 33955-3-1115 Page 15...
  • Page 16: Log Identification - Select Models

    LOG IDENTIFICATION - SELECT MODELS Part Number Front View Top View Description ALS24RVS ALS30RVS Log A R11872 R11877 Log B R11870 R11875 Log C R11871 R11876 Log D R11869 R11874 Log E R11898 R11898 Log F R11900 R11900 Log G R11901 R11901 Log H...
  • Page 17: Log Placement - Select Models

    LOG PLACEMENT - SELECT MODELS Before you begin: Do not, handle these logs with your bare Attention: Do not use Figures 1 to order replacement logs. hands! Always wear gloves to prevent skin irritation. After Refer to Page 16, Log Identification-Select Models, to handling logs, wash your hands gently with soap and water.
  • Page 18 LOG PLACEMENT - SELECT MODELS 1. Place Log A onto rear left burner pin as shown below. TOP VIEW FRONT VIEW Page 18 33955-3-1115...
  • Page 19 LOG PLACEMENT - SELECT MODELS 2. Place Log B onto right rear burner pin as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 19...
  • Page 20 LOG PLACEMENT - SELECT MODELS 3. Place boss of Log C into the hole in Log B and onto the front two left burner pins. See image below. TOP VIEW FRONT VIEW Page 20 33955-3-1115...
  • Page 21 LOG PLACEMENT - SELECT MODELS 4. Place Log D onto the front two right burner pins as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 21...
  • Page 22 LOG PLACEMENT - SELECT MODELS 5. Place Log E into the left slot in Log A as shown below. TOP VIEW FRONT VIEW Page 22 33955-3-1115...
  • Page 23 LOG PLACEMENT - SELECT MODELS 6. Place Log F into slot created by Log A and Log C. See image below. TOP VIEW FRONT VIEW 33955-3-1115 Page 23...
  • Page 24 LOG PLACEMENT - SELECT MODELS 7. Place Log G onto boss on Log F and rest on log shelf. See image below. TOP VIEW FRONT VIEW Page 24 33955-3-1115...
  • Page 25 LOG PLACEMENT - SELECT MODELS 8. Place Log H onto the boss on Log B as shown below. TOP VIEW FRONT VIEW 33955-3-1115 Page 25...
  • Page 26 LOG PLACEMENT - SELECT MODELS 9. Place Log I onto the boss on Log H and rest on Log D. See image below. TOP VIEW FRONT VIEW Page 26 33955-3-1115...
  • Page 27 LOG PLACEMENT - SELECT MODELS 10. Log assembly is completed. 33955-3-1115 Page 27...
  • Page 28: Ember Placement

    EMBER PLACEMENT Apply loose material (glowing embers) per appropriate WARNING: All previously applied loose material must be Installation Instructions and Owner's Manual. Replacement removed prior to reapplication. of loose material (glowing embers) must be purchased Replacement Loose Material (glowing embers) Part Num- from Empire Comfort Systems, Inc.
  • Page 29: Master Parts Distributor List

    MASTER PARTS DISTRIBUTOR LIST To Order Parts Under Warranty, please contact your local Empire dealer. See the dealer locator at www.empirecomfort. com. To provide warranty service, your dealer will need your name and address, purchase date and serial number, and the nature of the problem with the unit.
  • Page 30: Fireplace Service History

    FIREPLACE SERVICE HISTORY Date Dealer Name Service Technician Name Service Performed/Notes Page 30 33955-3-1115...
  • Page 31 FIREPLACE SERVICE HISTORY Date Dealer Name Service Technician Name Service Performed/Notes 33955-3-1115 Page 31...
  • Page 32 A Registered Trademark of Empire Comfort Systems Inc. 918 Freeburg Ave. Belleville, IL 62220 If you have a general question about our products, please e-mail us at info@empirecomfort.com. If you have a service or repair question, please contact your dealer. www.americanhearth.com Page 32 33955-3-1115...

This manual is also suitable for:

Als24rv-1Als30rv-1Als24rvs-1Als30rvs-1

Table of Contents