Advertisement
Quick Links
Split-type Air-Conditioner
MXZ-4D83VA
MXZ-5D102VA
English is original.
Übersetzung des
Originals
Traduction du texte
d'origine
Vertaling van het
origineel
Traducción del
original
Traduzione
dell'originale
Μετάφραση του
αρχικού
Tradução do
original
Oversættelse af
den originale tekst
Översättning från
originalet
Orijinalin çevirisi
Перевод
оригинала
Installation Manual
• This manual only describes the installation of outdoor unit.
When installing the indoor unit, refer to the installation manual of indoor unit.
Installationsanleitung
• Diese Installationsanleitung gilt nur für die Installation des Außengerätes.
Zur Installation des Innengeräts siehe die Installationsanleitung für Innengeräte.
Notice d'installation
• Cette notice ne décrit que l'installation de l'appareil extérieur.
Lors de l'installation de l'appareil intérieur, consultez la notice d'installation de cet
appareil.
Installatiehandleiding
• Deze handleiding beschrijft alleen de installatie van de buitenunit.
Raadpleeg de installatiehandleiding van de binnenunit wanneer u deze instal-
leert.
Manual de instalación
• En este manual sólo se describe la instalación de la unidad exterior.
Para instalar la unidad interior, consulte el manual de instalación de dicha uni-
dad.
Manuale per l'installazione
• Questo manuale descrive solo l'installazione dell'unità esterna.
Per l'installazione dell'unità interna, fare riferimento al relativo manuale di instal-
lazione.
Εγχειρίδιο εγκατάστασης
• Στο παρόν εγχειρίδιο περιγράφεται μόνο η εγκατάσταση της μονάδας εξωτερικού χώρου.
Για την εγκατάσταση της μονάδας εσωτερικού χώρου, ανατρέξτε στο εγχειρίδιο
εγκατάστασης της μονάδας εσωτερικού χώρου.
Manual de Instalação
• Este manual descreve apenas a instalação da unidade exterior.
Quando proceder à instalação da unidade interior, consulte o manual de instalação
da unidade interior.
Installationshåndbog
• Denne håndbog beskriver kun, hvordan udendørsenheden installeres.
Vedrørende installation af indendørsenheden henvises til installationshåndbogen
for indendørsenheden.
Installationsanvisning
• Denna installationsanvisning beskriver endast installation av utomhusenheten.
Se den separata installationsanvisningen för inomhusenheten.
Kurulum Kılavuzu
• Bu kılavuzda yalnızca dış ünitenin kurulumu açıklanmaktadır.
İç ünite kurulum işlemini yaparken iç ünite kurulum kılavuzuna bakın.
Руководство по установке
• В данном руководстве приводится описание установки только наружного прибора.
При установке внутреннего прибора см. руководство по установке внутреннего
прибора.
For INSTALLER
Für INSTALLATEUR
Destinée à l'INSTALLATEUR
Voor de INSTALLATEUR
Para el INSTALADOR
Per il TECNICO INSTALLATORE
Για τον ΤΕΧΝΙΚΟ
Para o INSTALADOR
Til INSTALLATØREN
För INSTALLATÖREN
TESİSATÇI İÇİN
Для МОНТАЖНИКА
English
Deutsch
Français
Nederlands
Español
Italiano
Ελληνικά
Português
Dansk
Svenska
Türkçe
Русский
Advertisement
Related Manuals for Mitsubishi MXZ-4D83VA
Summary of Contents for Mitsubishi MXZ-4D83VA
- Page 1 Split-type Air-Conditioner MXZ-4D83VA MXZ-5D102VA For INSTALLER Installation Manual English is original. English • This manual only describes the installation of outdoor unit. When installing the indoor unit, refer to the installation manual of indoor unit. Für INSTALLATEUR Installationsanleitung Übersetzung des Deutsch • Diese Installationsanleitung gilt nur für die Installation des Außengerätes. Originals Zur Installation des Innengeräts siehe die Installationsanleitung für Innengeräte. Destinée à l’INSTALLATEUR Notice d’installation Traduction du texte Français • Cette notice ne décrit que l’installation de l’appareil extérieur. d’origine Lors de l’installation de l’appareil intérieur, consultez la notice d’installation de cet appareil. Voor de INSTALLATEUR Installatiehandleiding Vertaling van het Nederlands • Deze handleiding beschrijft alleen de installatie van de buitenunit. origineel Raadpleeg de installatiehandleiding van de binnenunit wanneer u deze instal- leert.
- Page 2 Power supply per indoor unit / per indoor unit / Voltage quency capacity connecting wire difference *9 ment A *0 for multi-system for multi system 25 m / 70 m 25 / 70 MXZ-4D83VA 5 m 4-core 230 V 50 Hz 25 A 3-core 2.5 mm 20 g/m MXZ-5D02VA 25 m / 80 m 25 / 80 .0 / .5 mm 5 m * Connect to the power switch which has a gap of 3 mm or more when *6 Refrigerant pipe bending radius must be 00 mm or more.
- Page 3 1-3. SELECTING OPTIONAL DIFFERENT-DIAMETER JOINTS If the diameter of connection pipe does not match the port size of outdoor unit, use optional different-diameter joints according to the following table. (Unit: mm (inch)) Port size of outdoor unit Optional different-diameter joints (port size of outdoor unit → diameter of connection pipe) MXZ- MXZ- 6.35 (/4) → 9.52 (3/8) : PAC-493PI Liquid / Gas 4D83VA 5D02VA 9.52 (3/8) → 2.7 (/2) : MAC-A454JP 9.52 (3/8) → 5.88 (5/8) : PAC-SG76RJ A UNIT 6.35 (/4) / 2.7 (/2) 2.7 (/2) → 9.52 (3/8) : MAC-A455JP 2.7 (/2) → 5.88 (5/8) : MAC-A456JP B - D UNIT B - E UNIT 6.35 (/4) / 9.52 (3/8) Refer to the installation manual of indoor unit for the diameter of connection pipe of indoor unit. 1-4. SELECTING THE INSTALLATION LOCATION • Where it is not exposed to strong wind.
- Page 4 1-5. INSTALLATION DIAGRAM ACCESSORIES After the leak test, apply insulat- Check the following parts before installation. ing material tightly so that there is no gap. () Drain socket When the piping is to be at- PARTS TO BE PROVIDED AT YOUR SITE tached to a wall containing metals (tin plated) or metal netting, use (A) Power supply cord* a chemically treated wooden (B) Indoor/outdoor unit connecting wire* piece 20 mm or thicker between the wall and the piping or wrap 7 (C) Extension pipe to 8 turns of insulation vinyl tape...
- Page 5 2. OUTDOOR UNIT INSTALLATION 2-1. INSTALLING THE UNIT • Be sure to fix the unit’s legs with bolts when installing it • Be sure to install the unit firmly to ensure that it does not fall by an earthquake or a gust •...
- Page 6 3. FLARING WORK AND PIPE CONNECTION 3-1. FLARING WORK ) Cut the copper pipe correctly with pipe cutter. (Fig. , 2) 2) Completely remove all burrs from the cut cross section of pipe. (Fig. 3) No good Good • Aim the copper pipe downward while removing burrs to prevent Copper burrs from dropping in the pipe. pipe 3) Remove flare nuts attached to indoor and outdoor units, then put them on pipe having completed burr removal. (Not possible to put them on after flaring work.) Tilted Uneven Burred...
- Page 7 Lower the operating noise tion. 3) Turn on the main power for the air conditioner. 4-5. CHANGING THE AMPERE LIMIT • Description of the function: With this function, the amount of current that flows in the outdoor unit can be changed. MXZ-5D02VA MXZ-4D83VA Note: 0.5 A 0.5 A Use this function only when the amount of current exceeds the allowed value. 5.5 A 5.5 A [How to change the ampere limit]...
- Page 8 4-6. TEST RUN • Test runs of the indoor units should be performed individually. See the installation manual coming with the indoor unit, and make sure all the units oper- ate properly. • If the test run with all the units is performed at once, possible erroneous connections of the refrigerant pipes and the indoor/outdoor unit connecting wires cannot be detected. Thus, be sure to perform the test run one by one. About the restart protective mechanism Once the compressor stops, the restart preventive device operates so the compressor will not operate for 3 minutes to protect the air conditioner. Wiring/piping correction function This unit has a wiring/piping correction function which corrects wiring and piping combination. When there is possibility of incorrect wiring and piping combi- nation, and confirming the combination is difficult, use this function to detect and correct the combination by following the procedures bel Make sure that the following is done.
- Page 9 EG-CONFORMITEITSVERKLARING DECLARAÇÃO DE CONFORMIDADE CE MITSUBISHI ELECTRIC CORPORATION, SHIZUOKA WORKS 18-1, OSHIKA 3-CHOME, SURUGA-KU, SHIZUOKA-CITY 422-8528, JAPAN hereby declares under its sole responsibility that the air conditioners and heat pumps described below for use in residential, commercial and light-industrial environments: erklärt hiermit auf seine alleinige Verantwortung, dass die Klimaanlagen und Wärmepumpen für das häusliche, kommerzielle und leicht-industrielle Umfeld wie unten beschrieben:...