Attaching The Stand; Setting The Tv - Sharp LC-19LE520X Operation Manual

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
Confi rm the screws supplied with the TV.
1
Screws ( m 3)
(used in step 3)
2 Insert the stand base to the stand post on the
bottom of the TV. ( 1 )
3 Insert and tighten the 3 screws into the 3 holes
on the bottom of the stand base. ( 2 )
NOTE
• To detach the stand, perform the steps in reverse order.

Setting the TV

Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug
(IEC169-2)
75-ohm coaxial cable
(round cable)
Room antenna terminal
(75-ohm type)
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Connecting the AC cord
To AC INPUT
terminal
Antenna cable
(commercially available)
To antenna
terminal
Soft cushion
Screw
Screw driver
3