Table of Contents
Advertisement
10. Slide the unit into the cabinet.(See Figure 24)
CAUTION: For security purpose, reinstall screws(Type
A) at cabinet's sides.
11. Cut the foam-strip
between the upper window sash and the lower
window sash.
(See Figure 25)
12. Attach the window locking bracket
screw. (See Figure 26)
13. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Figure 27)
14. Lift the inlet grille and secure it with a type A screw
through the front grille.
(See Figure 28)
15. Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
to the proper length and insert
with a type C
Screw(Type A)
Figure 27
- 17 -
Power cord
Screw(Type A)
Figure 24
8
Foam-Strip
Figure 25
12
Figure 26
Figure 28
Figure 29
LGE Internal Use Only
Advertisement
Table of Contents
