Watching Tv - Panasonic TC-L26X1L Operating Instructions Manual

First Time Setup
Auto channel setup
Select "ANT/Cable setup"
First time setup
Language
Clock
ANT/Cable setup
Input labels
Select "ANT in"
ANT/Cable setup
ANT in
Auto program
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
Typical when Cable/Satellite box is connected to a TV input.
Prevents accidental tuning to an unavailable signal.
Select "Auto program"
ANT/Cable setup
ANT in
Auto program
Select scanning mode
Auto program
All channels
Analog only
Digital only
■
Press to exit from
a menu screen
Auto program
Progress
Number of analog channels
Number of digital channels
Press RETURN to quit
Note
To change setting
RETURN
(Language/Clock/
Confirm registered channels
ANT/Cable setup/
program
Input labels) later, go
Apply
to Menu screen
l Caption
(p. 28)
...
About broadcasting
...
systems
If OK is not pressed after selecting "Apply", the channels will not be saved.
Analog (NTSC):
The channel will be saved when no operation is performed for 60 seconds and the "Manual
Conventional
program" menu will also exit automatically.
broadcasting If you perform scanning more than twice, previously saved channels are erased.
Digital (ATSC):
Set the Input labels
New programming
that allows you to First time setup
view more channels
Language
featuring
Clock
high-quality video and
ANT/Cable setup
sound
Input labels
ATSC is not available
except in U.S.A., Input labels
Canada, and/or
Component
Mexico.
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
PC
(example: TC-L37X1)
14
(Continued)
next
select
ANT in
set
Cable: Cable TV
Cable
Antenna: Antenna
Not used: Skip TV tuning
select
next
Cable
select
(ALL channels/Analog only/Digital only)
ok
select
Start scanning the channels
Available channels (analog/digital) are automatically set.
8%
10
0 All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
select
"Apply"
Cancel
Favorite Add
... Yes
ok
... Yes
Label: [BLANK] SKIP/VCR/DVD/
next CABLE/SATELLITE/DVR/GAME/
AUX/RECEIVER/COMPUTER/
Blu-ray/CAMERA/DVD REC/
select
HOME THTR/MONITOR/MEDIA
CTR/MEDIA EXT/OTHER
select
set
Video 2 GAME
PC G A A
or
GAME
OK
Select RETURN
G ABC → abc Y Delete
Switches Input mode alphabet to
numeric

Watching TV

Connect the TV to a cable box/cable, set-top-box, satellite box or antenna cable (p. 8-11)
go to
■
Select Audio Mode for watching TV
Listen
with SAP
(Secondary
Audio
Program)
■
Switches Closed caption mode On or Off
Closed
caption
■
Press SUB MENU to show sub menu screen.
This menu consists of shortcuts to convenient functions.
Display the
MENU
SUB MENU
To watch TV and other functions
Turn power on
Note
If the mode is not TV, press
or select TV. (p. 20)
(TV)
Select a channel number
■
up
or
down
(TV)
Note
Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the
signal reception between cable TV and antenna. (p. 14, 39)
The channel number and volume level remain the same even after the TV is
turned off.
Digital mode
Press SAP to select the next audio track (if available) when receiving a digital
channel.
Audio track 1 of 2
(English)
Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
Closed caption On Closed caption Off
SUB
Setup SUB MENU
Channel surf mode
All
Set favorite
Edit CH caption
Signal meter
and
To directly input the digital
channel number
When tuning to a digital
channel, press the button to
enter the minor number in a
compound channel number.
example: CH15-1:
(p. 28)
15