Useful Viewing Functions; Optional Features Settings - Sharp LC-80LE857E Operation Manual

Useful viewing functions

Optional features settings

Go to "TV Menu" > "Setup" > "Option".
CH list Setup
:Enter :Back
Option for view
3D setup
Terminal setting
Colour system
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture
size varies with the type of signal received.
1
Go to "TV Menu" > "Setup" > "Option" >
"Option for view" > "Wide mode".
• You can also select an item by pressing f on the
remote control unit.
• The menu lists the "Wide mode" options selectable
for the type of video signal currently received.
Press a/b to select the desired item.
2
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
Item (for SD [Standard-Definition] signals)
Normal
Menu
Zoom 14:9*
Panorama
Option
Full
Cinema 16:9
Cinema 14:9*
Original
* The items will be diplayed in ATV/DTV/SAT mode.
Item (for HD [High-Definition] signals)
Full
Underscan
Dot by Dot
NOTE
• Some items do not appear depending on the type of
received signal.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 59 for PC signal inputs.
Keeps the original aspect ratio in a full
screen display.
For 14:9 letterbox pictures. A thin
side bar appears on each side, and
you may also see bars on the top and
bottom with some programmes.
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to "Full"
depending on broadcast signals.
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Keeps the original resolution, do not
expand.
Displays with an overscan image.
Crops all sides of screen.
Displays with an underscan image
only when receiving a 720p signal.
Displays with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Displays an image with the same
number of pixels on the screen when
receiving 1080i/1080p signals only.
46
Selecting the picture size automatically
Option
Auto wide (only DTV/SAT mode)
The "Auto wide" allows the TV to switch
automatically among the different picture size.
Go to "TV Menu" > "Setup" > "Option" > "Auto
wide".
NOTE
• Use "Wide mode" if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no aspect ratio information, the function will
not work even if enabled.
• This function is available for 3D images converted from
2D images or normal 2D images.
Selecting the picture size automatically
for 4:3
Option
4:3 mode (only DTV/SAT mode)
The 4:3 mode allows you to select between
"Normal" and "Full".
Go to "TV Menu" > "Setup" > "Option" > "4:3
mode".
Item
Normal range keeping 4:3 or 16:9
Normal
aspect ratio.
Full Wide image without side bars.
4:3 screen types
4:3 mode
"Normal"
4:3 mode
"Full"