[Option Settings]
■
[Film Cadence Mode]
Improves vertical resolution for movie images [On] /
[Off]
– This function is available for the interlaced signal.
■
[HDMI Content Type]
Adjusts the picture settings of each HDMI input
according to the selected content type [Graphics] /
[Photos] / [Auto] / [Off]
[Auto]: Automatically adjusts the picture settings
according to the received HDMI content if the
connected equipment supports HDMI Content Type.
– To set the availability of each content type for [Auto]
mode, select [Auto Detail Setting].
– For HDMI input.
■
[HDMI RGB Range]
Adjusts the black level of the image for each HDMI
input [Auto] / [Full] / [Normal]
– When the black level is not suitable, select [Full].
– For HDMI input.
■
[3D-COMB]
Makes still or slow motion pictures more vivid [On] /
[Off]
– Set to [On] to improve the colours in case patterning
occurs while viewing still or slow motion pictures.
– For PAL / NTSC signal reception in TV mode or from
composite.
[Screen Settings]
■
[16:9 Overscan]
Selects the screen area displaying the image for 16:9
aspect [On] / [Off]
[On]: Enlarges the image to hide its edges. Select
this if noise is generated on the edge of the screen.
[Off]: Displays the image in the original size.
– This function can be memorised separately for
SD (Standard definition) and HD (High definition)
signals.
■
[H-Size]
Switches over horizontal scanning size [H-Size1] /
[H-Size2]
■
[Zoom Adjustments]
Adjusts the vertical position and size when the aspect
is set to [Just] or [Zoom] mode
– [Just]: V-Size max is 3
– [Zoom]: V-Size max is 15
■
[Screen Display]
Turns off / on the TV screen without turning off the TV
[On] / [Off]
– The sound is active even if the screen turns off.
– Press any buttons (except Standby) to turn the
screen on.
[Copy Adjustment]
Copies picture adjustments to other inputs.
[Option Settings] and [Screen Settings] are not copied.
■
[Destination Viewing Mode]
Sets the viewing mode for the destination input [True
Cinema] / [Custom]
■
[Destination Input]
Selects the destination input
■
[Copy Start]
Select [Yes] to start copying
[Reset Picture Defaults]
Resets the current picture settings to defaults.
Sound
[Mode]
Sets your favourite sound mode [Standard] / [Music] /
[Speech] / [User]
●
The selected mode affects all input signals.
[Standard] : Standard sound mode
[Music] : Improves sound quality for watching music
videos, etc.
[Speech] : Improves sound quality for watching news,
drama, etc.
In Standard, Music and Speech modes, you can
adjust the [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User]: Adjusts the sounds manually by using the
equaliser
– When you select [User] mode, [Equaliser] is active
instead of [Bass] and [Treble]. Select [Equaliser] and
adjust the frequency.
[Bass], [Treble]
Adjusts the bass / treble level respectively
[Equaliser]
Adjusts the frequency level to suit your favourite sound
quality
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level
by using the cursor buttons.
●
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level
of the higher frequency.
●
To reset the levels of each frequency to the default
settings, select [Reset Equaliser Settings] by using the
cursor button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers
[Surround]
Surround sound settings [On] / [Off]
[Auto Gain Control]
Automatically regulates large sound level differences
between channels and inputs [On] / [Off]
[Volume Correction]
Adjusts the volume of individual channel or input mode
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the
distance between the speakers and the wall
[Up to 30cm] / [Over 30cm]
●
If the distance between the TV and wall is over 30 cm,
[Over 30cm] is recommended.
●
If the distance between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
[MPX]
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
●
For Analogue TV
(below)
13