Table of Contents
Advertisement
Basic Operation
Turning the TV On and Off
1
How to turn the TV on or off
1. Insert the power cord plug into a polarized AC
outlet.
2. Press POWER button on the remote control or
button on the LCD TV.
3. Normal picture will be displayed on the screen after
6 seconds. If no signal input, "No Signal" will be
displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or
button on the LCD TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.
Auto power -off
If there is no signal input in any Mode, the TV will automatically accesses the standby
state in about 15 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
To use Car cord
Use the Car Cord provided for operation on 12V DC
NOTE:
1.AC/ DC adaptor provided can be connected to the specified
voltage (AC 110 volts 60HZ).
2.If the polarized AC cord does not fit into a non
attempt to file or cut
the blade. It is the user s responsibility to have
an electrician replace the obsolete outlet.
3.If you cause a static discharge when touching the unit, and the
unit fails to function, simply unplug the unit from the AC outlet, wait
a few minutes, and plug it
back in. The unit should return to normal
operation.
19
.
NC
polarized AC outlet, do not
Basic Operation
Menu operation
1
Input Setup
Press AV/TV/DVD key on the remote control to enter "INPUT
SOURCE" menu. There are five options for you to select:
"TV",
"AV",
"DVD",
"Component","HDMI",and "VGA".
Use ▲/q
key to move the cursor to the input you desired and
press ENTER key to confirm.
2
Channels Selection
There are four ways to select channel:
1) Using 0~9,
keys on the remote control to select channel directly.
2). Using CHr
/s
key on the remote control or on your TV to select channel.
3) Press PRE.CH key to turn to previous channel, press it again to return to current
channel.
Note: PRE.CH is not activated if no channel has been changed after TV turning on.
4) Select channels from "All Channels List" or "Favorite Channels List".
3
a
M
S
Volume Adjustment
nd
ute
etup
Volume adjustment
Press VOL +/- key on the remote control or on the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL
( To increase the volume, press VOL + key;
( To decrease the volume, press VOL - key;
Mute
Press MUTE key on the remote control to display mute icon on the
left bottom of the screen, and the volume of TV will be turned off, press
MUTE key again to turn on the volume. Mute can be canceled by using
one of the methods below:
( Mute will be canceled if you press MUTE button again.
( Mute will be canceled if you press VOL + key.
TV
AV
DVD
Component
HDMI
VGA
+/-
key:
20
Advertisement
Table of Contents
