Change Settings; Picture; Sound; Network (Installation - Philips BDP5650 User Manual

2 Change settings

This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press
menu, press .

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV display]: Select a picture display format
•
to fit the TV screen.
[HDMI video]: Select an HDMI video
•
resolution.
[HDMI Deep Color]: Display colors with
•
more shades and hues when the video
content is recorded in Deep Color and the
TV supports this feature.
• [Picture settings]: Select a predefined
color setting.
[Watch 3D video]: Set to 3D or 2D
•
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Watch 3D video
. To exit the
Note
•
If you change a setting, make sure that the TV supports
the new setting.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Night mode]: Select quiet or full dynamic
•
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
[HDMI Audio]: Set an HDMI audio format
•
when this player is connected through
HDMI.
[Digital Audio]: Select an audio format
•
for the sound output when this player is
connected through a digital connector
(OPTICAL).
• [PCM Downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (OPTICAL).
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.

Network (installation...)

1
Press .
2
Select [Setup] > [Network] to access the
network setup options.
[Network installation]: Start a wired or
•
wireless installation to make the network
work.
EN 9