OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCV5500-BN LCV5500-BP 1205(V1.0)
WARNING: This product contains chemicals known to the CAUTION State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling. RISK OF ELECTRIC SHOCK FCC WARNING: This equipment may generate or use DO NOT OPEN radio frequency energy.
Warning: The product has been dropped or the case is end user. broken, turn off the power and unplug the power cord. • Caution: Danger of explosion if battery is incorrectly (This may cause fire, electric shock, or injury.) replaced. Replaced only with the same or equivalent type recommended by the manufacturer.
LG Electronics hereby declares that this/ Disposal of your old appliance these product(s) is/are in compliance with the essential requirements and other When this crossed-out wheeled bin relevant provisions of Directive 2004/108/ symbol is attached to a product it EC, 2006/95/EC, and 2009/125/EC.
Important Safety Instructions Read these instructions. and the point where they exit from the apparatus. Keep these instructions. 11. Only use attachments/accessories specified by the manufacturer. Heed all warnings. 12. Use only with the cart, stand, tripod, bracket, or Follow all instructions. table specified by the manufacturer, or sold with the Do not use this apparatus near water.
Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated DC 12 V or AC 24 V. Avoid viewing a very bright object (such as light fittings) Certified/Listed Adaptor which comply with LPS. during an extended period. Avoid operating or storing the unit in the following locations.
MEZ62687703 SELFTAPPING SCREW 4 Place PRODUCT CENTER POSITION Features CABLE HOLE (LCV5300) CABLE HOLE (LCD5300) Accessories This Color Video Camera is designed for installation in a video surveillance system. This manual contains instructions on how to install and FRONT manage the Color Video Camera in your video surveillance MEZ62687703 SELFTAPPING SCREW 4 Place...
Part Names and Functions a Dome Cover b Lens Cover c Focus lock lever Fixes the focus position after adjusting. d Zoom lock lever Fixes the zoom position after adjusting. e Rotate adjuster f Tilting lock screw Fixes the tilting position after adjusting. g Pan adjuster h Setup menu control buttons i Video Out connector...
Connections Basic connection Connect a external power source to the power input jack of the camera. The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied. Make the video signal connection between the camera and the monitor or DVR.
Installation Mounting the Camera Pass the connection cable through the inner side of the ceiling. Note: Refer the manual of Dome bracket adaptor when you mount the camera on the wall, pendant and parapet. Follow the instructions below to surface mount the camera with supplied camera mounting bracket.
Installation Install the camera mounting bracket to the ceiling. Connect the cables to the cable jacks of the camera body.
Installation Assemble the camera and the housing. Make sure Use the supplied wrench to tighten the screws when you assemble the camera in the right direction. And then, assemble the dome cover and lens cover.
Installation Image Adjustment Connect a portable monitor to the video jack. You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Notes: • Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. •...
Installation Adjust the pan/tilt/rotate position of the camera. Adjust the zoom. 4-1. Unlock the zoom lever. TILT 4-2. Move the lever to adjust the zoom. TILT 4-3. Lock the lever. ROTATE NEAR WIDE TELE...
Installation Adjust the focus. This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. After 5-1. Unlock the focus lever. then attach the lens cover and dome cover. 5-2. Move the lever to adjust the focus. 5-3.
Menu Operation • UP button: Used to move upper direction on the menu screen. Use this button to select an item or adjust the param- eters. • DOWN button: Used to move lower direction on the menu screen. Use this button to select an item or adjust the parameters. •...
Menu Operation The following table shows the list of menu items and Main Sub Menu Contents options. You can adapt the camera to your requirements by Menu setting up the respective items in these menus. BURST ON/OFF LEVEL LOW/ MIDDLE/ HIGH / USER Main AUTO Sub Menu...
Menu Operation Main Main Contents Contents Menu Menu Menu Menu 3D-DNR 0 to 100 MASK 1 to 2 SELECTION OFF,MOZAIC, MASK 1 to 8 DISPLAY COLOR1 to SELECTION POLYGON PRIVACY COLOR 8 OFF,MOZAIC, MASK DISPLAY SHAPE COLOR1 to COLOR 8 POSITION POSITION ,/ 2 to 98...
Menu Operation General Operation Main Contents Menu Menu Press [SET] button. FACTORY RESET SYSTEM The setup menu screen appears on the monitor. EXIT TOP/RET/END EXIT Use [UP] or [DOWN] button to select an option then press [SET] button. Submenu appears on the monitor. Use [UP] or [DOWN] button to select a submenu option.
Menu Operation Exposure Settings Backlight setting Use Backlight option to view the object clearly in backlight You can set the exposure options using the EXPOSURE conditions. menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. Use [LEFT] or [RIGHT] button to select a mode. Press [SET] button and the EXPOSURE menu appears.
Menu Operation > ACE (Adaptive Contrast Enhancement) : This automatically activated in low luminance function is used when you want to display scene. dark areas of WDR brightly. • OFF: Not used. • BLC: Camera's backlight compensation feature BRIGHTNESS setting helps alleviate issues of visibility in high contrast areas.
Menu Operation AGC (Automatic Gain Control) setting SHUTTER (Shutter Speed) setting If the images are too dark, change the maximum [AGC] Select the desired shutter speed for camera exposure. You value to make the images brighter. can change the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker.
[---] mark is displayed. • If you set BACKLIGHT mode to WDR, sub menu [SHUTTER LIMIT] of [SHUTTER AUTO] will be blocked and shutter will be fixed. (LCV5500-BN : 1/60, LCV5500-BP : 1/50) Use [UP] or [DOWN] button to select [SENS-UP] option.
Menu Operation Note: • ATW (Auto-Tracing White Balance): Use [LEFT] or [RIGHT] button to select the ATW then press If you set to one of the [SHUTTER] options except [AUTO] [SET] button. and [OFF] on the [SHUTTER] menu, the [SENS-UP] setting is AUTO: Use [LEFT] or [RIGHT] button to select the not available and [---] mark is displayed.
Menu Operation Day/Night Setting select [ON] or [OFF]. > LEVEL: Use [LEFT] or [RIGHT] button to select a level. DWELL TIME: Use [LEFT] or [RIGHT] button > to select a dwell time. • DAY: Color mode enabled. • NIGHT: Black-and-white mode enabled. >...
Menu Operation Motion Detection Setting OFF on the STATE. Use [UP] or [DOWN] to select an option then use • The motion detection detects the moving objects in the [LEFT] or [RIGHT] button to adjust the option. scene by monitoring changes in brightness level. You can >...
Menu Operation 3D-DNR Setting Privacy Setting This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 14 zones can be registered. Select [3D-DNR] option. If pictures are not clear due to brightness, this option would reduce the noise of picture.
Menu Operation > Use [UP] or [DOWN] to select an option then of the mask. use [LEFT] or [RIGHT] button to adjust the SIZE,/: Enlarge or decrease the option. horizontal size of the mask. POSITION,/: Moves horizontal SIZE;.: Enlarge or decrease the position of the mask.
Menu Operation Special Menu Settings Notes: • You can adjust the mask color manually except This menu lets you adjust and set up D-ZOOM, D-EFFECT, for COLOR 8. SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE • RED, GREEN, BLUE and TRANSPARENCY function by yourself in the SPECIAL menu.
Menu Operation Setting the D-ZOOM (Digital Zoom ) level • TILT: Use [LEFT] or [RIGHT] button to move the screen. (up or down) You can select the digital zoom level. Setting the D-EFFECT (Digital effect) You can select the digital effect. Select [D-ZOOM] option on the [SPECIAL] menu.
Menu Operation Setting the SHARPNESS effect Setting the COLOR The degree to which the boundary of the two portions is You can switch the displayed picture to gray scale or color. clearly distinguished. Select [COLOR] option on the [SPECIAL] menu. Select [SHARPNESS] option on the [SPECIAL] menu.
Menu Operation SYNC Setting Setting the USER TITLE You can use the camera identification to assign a number and character to the camera. The USER TITLE is displayed on the upper left of the screen. To disappear the user title, select [OFF]. Select [USER TITLE] option.
Menu Operation SYSTEM Setting • A (Blank): Inserts a space at the cursor position. • : Moves cursor to left or right. LANGUAGE Setting Select the viewer language for the camera setup menu and OSD information display. Select the [SYSTEM] menu. Press [SET] button and the [SYSTEM] menu appears.
Specification Item LCV5500-BN LCV5500-BP Signal System NTSC Total/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 Pixels Image Device 6 mm (1/3 Type) Exview Super HAD CCD II XDI-V Lens 2.8 mm to 11 mm Vari-focal Lens, F1.2...
Specification Item LCV5500-BN LCV5500-BP 2D + 3D-DNR Electronic Shutter Speed 1/60 to 1/120 000 1/50 to 1/120 000 White Balance ATW / AUTO / AWC/SET KEY / MANUAL Motion Detection 8 Zones Privacy Zone Masking 14 Masks Digital Effect OFF / MIRROR / ROTATE / V-FILP...