Related Manuals for Philips HTL6145C
Summary of Contents for Philips HTL6145C
- Page 1 Always there to help you Register your product and get support at www.philips.com/support HTL6145C Question? Contact Philips User manual...
-
Page 3: Table Of Contents
Contents 8 Troubleshooting 1 Important Help and support Safety Care for your product Care of the environment Compliance 2 Your SoundBar Main unit Remote control Connectors Wireless subwoofer 3 Connect and set up Place subwoofer Pair up with the subwoofer Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices 8... -
Page 4: Important
• Before you connect the product to the For extensive online support, visit power outlet, ensure that the power www.philips.com/support to: voltage matches the value printed on the • download the user manual and the quick back or bottom of the product. Never... -
Page 5: Care For Your Product
Risk of contamination! Care of the environment • Do not mix batteries (old and new or carbon and alkaine, etc.). Disposal of your old product and battery • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. •... -
Page 6: Compliance
2 Your SoundBar Compliance Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your This product complies with the radio SoundBar at www.philips.com/support. interference requirements of the European Community. Hereby, Gibson Innovations declares that... -
Page 7: Remote Control
AUX: Switch your audio source to • Remote control the AUDIO IN or AUX connection (3.5mm jack). This section includes an overview of the (Previous/Next) remote control. Skip to the previous or next track in USB mode. (Play/Pause) • Start, pause or resume play in USB mode. -
Page 8: Connectors
Connectors Wireless subwoofer This section includes an overview of the The SoundBar comes with a wireless subwoofer. connectors available on your SoundBar. a HDMI OUT (ARC) - TO TV Connect to the HDMI input on the TV. b HDMI IN Connect to the HDMI output on a digital device. -
Page 9: Connect And Set Up
3 Connect and set This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note • For identification and supply ratings, see the type plate at the back or bottom of the product. -
Page 10: Connect To Tv
Connect to TV Connect digital devices through HDMI Connect your SoundBar to a TV. You can listen to audio from TV programs through your Connect a digital device such as a set-top box, SoundBar. Use the best quality connection DVD/Blu-ray player, or games console to your available on your SoundBar and TV. -
Page 11: Use Your Soundbar
4 Use your Option 1: Connect audio through a digital optical cable SoundBar Best quality audio This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. -
Page 12: Play Audio Through Bluetooth
Auto volume On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS Turn the auto volume on to keep the volume HTL6145 to start connection (see the constant when you switch to a different source. -
Page 13: Connect Bluetooth Via Nfc
» If the connection fails, BT on the Select and play audio files or music on your Bluetooth device. display panel blinks continuously. • During play, if a call is coming, music Select and play audio files or music on play is paused. -
Page 14: Auto Standby
Button Action Apply factory settings Start, pause or resume play. Skip to the previous or next track. You can reset this product to the default During USB play, press repeatedly to settings programmed at the factory. select a repeat or shuffle mode, or In any source mode, on the remote control turn off a play mode. -
Page 15: Update Software
In HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence. Update software via USB Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB storage device. -
Page 16: Wall Mount
6 Wall mount 7 Product specifications Before you mount your SoundBar on the wall, read all safety precautions. Note Note • Specifications and design are subject to change without notice. • Improper wall mounting may result in accident, injury or damage. - Page 17 Bluetooth connection on your Bluetooth device, or enable Bluetooth connection via Main unit the NFC tag (if available). • Power supply: • Model (Philips branded AC power adapter): DYS602-210309W; AS650-210-AA309 • Input: 100-240 V~, 50/60 Hz 1.5 A • Output: 21V , 3.09A...
- Page 18 • When "HDMI ARC" blinks, it indicates If you still have a problem, get support at that the connected TV is not HDMI ARC www.philips.com/support. compliant or an unsupported audio format is detected. Main unit Bluetooth The buttons on the SoundBar do not work.
- Page 19 • For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the SoundBar. A device cannot connect with the SoundBar via NFC. • Make sure that the device is supported by NFC.
- Page 20 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. © 2013 CSR plc and its group companies. The aptX mark and the aptX logo are ® trade marks of CSR plc or one of its group companies and may be registered in one or Manufactured under license under U.S.
- Page 22 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.