Programming - ICM Controls SC 5812 Operation Manual

Program Overview
The SC5812 programmable thermostat has four periods (MORN, DAY, EVE, NITE) that are customizable
for each day of the week . Each period will have a start time, heat temperature, cool temperature
and programmable fan option . The SC5812 monitors the day and time, while maintaining the specific
conditions you have chosen for each period in your program .
Setting the program schedule:
1 . Press the SYS (left) button until you are in OFF mode .
2 . Press and hold the PROG button (SYS and FAN buttons pressed simultaneously) for 6 seconds .
3 . Press the FAN (right) button 3 times .
4 . SUN thru SAT are blinking .
From this screen you have 2 options:
1 . Press the FAN (right) button to begin programming all 7 days at one time, or
2 . Press the up button to see the other programming options .
Note: The days of the week shown on the display will be programmed simultaneously .
The screens are listed below .
Screen 1 SUN
Screen 2
Screen 3
Screen 4
Screen 5
Screen 6
Screen 7
Screen 8 SUN
Screen 9
Screen 10 SUN


Programming

MON TUE WED
MON TUE WED
MON
TUE
WED
THU FRI SAT
THU FRI
THU
FRI
SAT
SAT
SUN MON TUE WED THU FRI SAT
PROG