Pro-Form 480 LE User Manual page 9

7. The Console (5) can use four D batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures,
allow it to warm to room temperature
before inserting batteries. Otherwise,
you may damage the console displays or
other electronic components. Remove
the battery cover and insert the batteries
into the battery compartment. Make sure to
orient the batteries as shown by the dia-
gram inside the battery compartment.
Then, reattach the battery cover.
To purchase an optional power adapter,
call the telephone number on the cover
of this manual. To avoid damaging the
console, use only a manufacturer-sup-
plied power adapter. Plug one end of the
power adapter into the jack on the console;
plug the other end into an outlet installed in
accordance with all local codes and ordi-
nances.
8. While another person holds the Console (5)
near the Upright (3), connect the wire har-
ness on the Console to the Upper Wire
Harness (48).
Insert the excess wire harness into the
Upright (3).
Tip: Avoid pinching the wires. Attach the
Console (5) to the Upright (3) with four M4 x
16mm Round Head Screws (101).
Downloaded from www.Manualslib.com manuals search engine
7
Batteries
5
8
5
101
3
9
Cover
48
Wire
Harness
Avoid pinching
the wires