Functions Of The Buttons On The Front Panel - Kenwood DNN992 Quick Start Manual

Functions of the Buttons on the Front Panel

1 2 3
No.
s (Reset)
1
• If the unit or the connected unit fails
to operate properly, the unit returns
to initial settings when this button is
pressed (Instruction Manual P.157).
• If the SI function is turned on, this
indicator flashes when the vehicle
ignition is off (Instruction Manual
P.130).
R, S (Vol)
2
• Adjusts volume.
Remote Sensor
3
• Receives the remote control signal.
NAV
4
• Displays the navigation screen.
• Pressing for 1 second switches camera
view display on/off.*
MENU
5
• Displays the option menu screen.
• Pressing for 1 second switches AV out
sources.
HOME
6
• Displays the Home screen (P.12).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
10
ñ English
4
Name/ Motion
6
HOME
5 6 7 8
No.
6 (Back)
7
• Return to the previously viewed screen.
• Pressing for 1 second displays the Hands
G (Eject)
8
• Ejects the disc.
• When the panel is opened, pressing
• When the panel is closed, pressing for
Disc insert slot
9
• A slot to insert a disc media.
SD card slot
p
• DNN992: A slot to insert an SD card.
• DNN9150BT: An SD card slot for
* The function of the [NAV] button can be changed to the
display off function. (Instruction Manual P.129)
9
10
Name/ Motion
Free screen (Instruction Manual
P.120).
closes the panel and pressing for 1
second ejects the disc forcibly.
1 second fully opens the panel to the
location of the SD card slot.
upgrading the map. For how to upgrade
the map, refer to the instruction manual
of the navigation system.