Acer FP450 User Manual page 8

4. Put base cover back.
5. Put the rear cover back.
B. Connect the audio cable to your computer.
C. Connect the signal cable, which is directly attached to the monitor, to the VGA out-
put of the graphics card on the computer.
D. Connect the power cord at the back of the monitor to an AC power socket. Please
make sure that the socket is not blocked or covered, so you can disconnect the unit
from AC supply if you need to. Your monitor is equipped with an automatic power
supply for a voltage range from 100 to 240 Volt at a frequency of 50 to 60 Hz. Be sure
that your local power is within the supported range. If you are unsure, ask your elec-
tricity supplier.
Acer LCD Color Monitor User's Guide
English 7