Setting Up The Base And Charging Cradle (If Included); Connecting The Base - Gigaset C590 User Manual

Setting up the base and charging cradle (if included)

The base and charging cradle are designed for use in enclosed dry rooms with a
temperature range of +5°C to +45°C.
¤
Install the base on a level, non-slip surface in a central location in your house or
flat or mount the base or charging cradle on the wall
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base

¤
First connect the
mains adapter 1.
¤
Then connect the
telephone jack
and insert the cables
into the cable ducts.
Please note:
u
The mains adapter
must always be connected, as the phone will not operate without a mains con-
nection.
u
Only use the mains adapter and phone cord supplied. Pin connections on tele-
phone cables can vary (pin connections
2
2
1
¢
page 65.
¢
page 44) is activated.
¢
page 62).
First steps
1
1
9