Table of Contents
Advertisement
Listening to radio
Using buttons on the Remote Control
1.
Press the FUNCTION button to select FM.
2.
Tune in to the desired station.
Preset Tuning 1 : You must fi rst add a desired
•
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING/CH (
) button to select the preset
station.
Manual Tuning : Press the STOP (@) button to
•
select MANUAL and then press the TUNING/
CH (
) button to tune in to a lower or higher
frequency.
•
Automatic Tuning : Press the STOP (@) button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically
search the band.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
•
sound switches between STEREO and
MONO.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
1.
Press the FUNCTION button to select FM.
Press the TUNING/CH (
2.
<89.10>.
3.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
•
4.
Press the TUNER MEMORY button
again.
Press the TUNER MEMORY button before
•
NUMBER disappears from the display.
NUMBER disappears from the display and
•
the station is stored in memory.
5.
To preset another station, repeat steps 2 to 4.
To tune in to a preset station, press the
•
TUNING/CH (
) button to select a
channel.
Connecting an iPod/iPhone using the
FUNCTION
POWER
If the home theater is connected to an iPod/iPhone
TV SOURCE
using the USB cable (not included), you can play
music in iPod/iPhone through the home theater.
DVD RECEIVER/TV
SLEEP
1
2
3
4
5
6
7
8
9
REPEAT
0
1.
Connect an iPod/iPhone using the USB
cable to the front USB port.
2.
Press the ENTER button.
MUTE
3.
Select the music fi le to play.
- You can use the remote control or the
TUNING
VOL
/CH
SFE MODE
DISC MENU
MENU
TITLE MENU
✎
NOTE
POPUP
TOOLS
INFO
) button to select
RETURN
EXIT
TUNER
MEMORY
MO/ST
A
B
C
D
INTERNET
@
DSP
use iPod/iPhone with a Wireless Dock
Cradle (sold separately) for iPod/iPhone
You can enjoy fi ner quality music through the
speakers by transmitting an iPod/iPhone's audio
signal using a Wireless Transmitter.
To connect the Cradle to the main unit when you
use the Cradle the fi rst time, you have to set the
Linking ID manually. (see page 56)
After you set the Linking ID, the Cradle will
connect to the Wireless Transmitter automtically
when you turn it on.
uSB Cable
5V
500mA
ASC IN
ASC IN
500mA
Your iPod is automatically turned on.
•
The "iPod" message appears on the TV
•
screen.
product to control simple playback functions
such as the PLAY, PAUSE, STOP, [ /]
and( /)buttons. (See page 16.)
You can play a video only when you use the iPod
Dock.
If you want to return to the iPod menus while the
iPod player is connected using the USB cable,
press FUNCTION on the remote control or press
on the front panel of the system and select R.
IPOD. The FUNCTION mode switches as
follows: BD/DVD ; D. IN ; AUX ; R. IPOD
; W. IPOD ; FM
English
Advertisement
Table of Contents
