LG WD-P1410BRD Service Manual page 45

TSG (TURBO STEAM GENERATOR)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
[F1❋03FDS]
1 Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
2 Taking ou the screw of the TSG.
< Heater for STEAM>
• Rating : 230V 1000W
• Resistant : 42.5~49.5Ω
1 Remove the back cover.
2 After loosening the bolt, Rotor, pull out the
rotor.
1 Remove the 6 bolt from the stator.
2 Disconnect the 2 connectors.
Motor Stator
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
1 Remove the hinges (Damper) at the Tub.
2 The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
3 The hinge at the base is pulled off.
(To arrow direction)
44
Hall Sensor
U V W
• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)
Hb
Common
Ha