Operating The Dishwasher; Hot Air Drying - Beko DW603 User Manual

6

Operating the dishwasher

•
Turn the water tap on. Open the
door of the machine.
•
Check that the upper and lower
arms can rotate freely.
•
Add the detergent
•
Close the door of the machine
•
Push in the on/off button and
check that the programme
indicator lights come on.
•
Check the salt and rinse aid level
indicator lights before you start
the machine. If necessary add salt
and rinse aid.
•
Select the required programme
by referring to the programme
chart. Choose the desired
programme
•
Press start / stop button and
check that the start / stop
indicator light comes on.
! Do not open the dishwasher door
whilst the appliance is in operation.
However, in case the door is opened
while the machine is working, then
a safety mechanism ensures the
machine immediately stops. Water
may be very hot, so be careful.
! Care must be taken if opening the
door, as steam and water will escape.
•
Press the on/off button after the
programme is completed. The
indicator lights will go off.
•
Unload the baskets - we
recommend to turn off the water
tap when not in use
! Just after the dishwasher has
started the selected programme,
if you find that you want to put in
another item to be washed, open the
door carefully. Care must be taken if
opening the door, as steam and water
will escape. Then after putting in the
item, close the door. The dishwasher
will resume operation.

Hot Air Drying

Hot Air Drying ensures your dishes
are dried efficiently.
Unloading dishwasher
Dishes should be allowed to cool for
about 15 - 30 minutes after the end of
the programme.
You will improve drying results by
leaving the dishwasher door ajar for
at least 15-30 minutes as soon as the
programme finishes.
! Care must be taken when
opening the door, as steam will
escape.
First unload the lower, then the upper
rack. This prevents drops of water
from falling onto the full lower basket
when the dishes in the upper basket
are being removed.
20 GB