Nexgrill 720-0486 Assembly & Operating Instructions

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

ASSEMBLY & OPERATING INSTRUCTIONS

Model: 720-0486

FOR PROPANE GAS USE ONLY

PLEASE CONTACT

ABOUT ASSEMBLY OR GRILL OPERATION

DO NOT RETURN TO THE PLACE OF PURCHASE

FOR OUTDOOR USE ONLY

1-800-913-8999

FOR ASSISTANCE

J05Y06P-1

Table of Contents

Summary of Contents for Nexgrill 720-0486

Page 1 ASSEMBLY & OPERATING INSTRUCTIONS Model: 720-0486 FOR OUTDOOR USE ONLY FOR PROPANE GAS USE ONLY J05Y06P-1 PLEASE CONTACT FOR ASSISTANCE 1-800-913-8999 ABOUT ASSEMBLY OR GRILL OPERATION DO NOT RETURN TO THE PLACE OF PURCHASE...
Page 2 MESSAGE TO OUR CONSUMERS Thank you for selecting our stainless steel gas grill. Because this appliance contains features which may not be found on other grills, we recommend that you read this entire booklet before your first use. Keep it in a handy place as it has answers to questions that may occur during future use.
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION ONE SECTION FOUR Table of Contents & Importance-------------- Care & Maintenance-------------------25-26 Precautions----------------------------------------1-2 Placement of the Grill--------------------------- 3 SECTION FIVE Trouble Shooting-------------------------27-28 SECTION TWO Exploded View----------------------------29 Assembly Instructions------------------------4-13 Part List-------------------------------------30 To Match Light The Grill-----------------------14 Operating Parts & Grilling Hints---------31 Gas Hook Up-----------------------------------15-16 Installer Final Check List------------------------16 SECTION SIX...
Page 4: Precautions
PRECAUTIONS SAFETY PRACTICES TO AVOID PERSONAL WARNING INJURY Do not try to light this appliance without first reading the “LIGHTING When properly cared for, your stainless INSTRUCTIONS” section in this manual. steel grill will give safe, reliable service for many years. However, extreme care must be used since the grill produces intense TESTED IN ACCORDANCE WITH ANS heat and that can increase accident...
Page 5 PRECAUTIONS Moist or damp potholders on hot surfaces DO NOT STORE ITEMS OF INTEREST may cause burns from steam. Do not use a TO CHILDREN AROUND OR BELOW towel or bulky cloth in place of potholders. THE GRILL OR IN THE CART. NEVER Do not let potholders touch hot portions of ALLOW CHILDREN TO CRAWL INSIDE the grill rack.
Page 6: Placement Of The Grill
PRECAUTIONS Do not use the grill for cooking outside in a well ventilated area, out of the excessively fatty meats or products which reach of children. promote flare-ups. Do not operate the grill DO NOT USE BRIQUETTES OF ANY under unprotected combustible KIND IN THE GRILL.
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS PLEASE READ THE INSTURCTION CAREFULLY AND FOLLOW STEP BY STEP ●Propane Tank is not included ●Philips head Screwdriver (not provided) ●The following hardware is provided Des c r i pt i on Spec i f i c at i on Quant i t y I t em phi l i ps head s c r ew...
Page 8 ASSEMBLE INSTRUCTIONS ASSEMBLY INSTRUCTIONS PLEASE READ THE INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP. TOOLS REQUIRED: (1) PHILIPS HEAD SCREWDRIVER – NOT PROVIDED STEP 1: Attach bottom panel to side panel with 4 pieces 1/4x50mm philips head screws with 4 pieces 1/4 locking washer as shown figure below. STEP 2 Attach the black panel to the two side panels with 4 pieces 1/4x15mm philips head screws and 4 pieces 1/4 locking washers, and attach the gas tank...
Page 9 ASSEMBLY INSTRUCTIONS STEP 3: Attach the casters to the legs of the bottom.Tighten caster bolts securely using hex nut wrench provided in parts pack. STEP4: Attach door shaft to the outside of cart legs with 4 pieces ¼’’x50mm philips head screws and 4 pieces 1/4 locking washer, then using 2 pieces ¼’’x15mm philips head screws and 2pieces 1/4 locking washers to inside of cart legs.
Page 10 ASSEMBLY INSTRUCTIONS STEP 5: Remove the grill head unit from carton, place onto cart from above as shown on diagram (below). And secure to cart frame. Caution!!! Head unit is heavy, to avoid injury, we strongly recommend 2 or more people for this step. STEP 6: Secure the head unit to cart with 4 pieces 1/4”...
Page 11 ASSEMBLY INSTRUCTIONS STEP 7: Attach the left door handle using 4pieces 3/16x10mm philips head screws with 4 pieces 3/16 locking washers. Then attach right door handle using 4 pieces 3/16x10mm philips head screws with 4pieces 3/16 locking washers as shown on below figure. STEP 8: Attach the hinge pin in bottom of right side door into hole at the bottom right front cart leg, then align door with right side door bracket.
Page 12 ASSEMBLY INSTRUCTIONS STEP 9: •Attach side burner front panel to side burner with 3 pieces ¼’’x15mm philips head screws with 3 pieces locking washers. •Insert 4pieces ¼’’x15mm philips head screws with 4pieces ¼’’ locking washers halfway to the right side grill body panel. •Place side burner assembly keyholes over bolts and slide down,then tighten securely.
Page 13 ASSEMBLY INSTRUCTIONS STEP 11: Attach the grease collector into slide rails under firebox from back of grill. Place the grease tray into rails on grease slide. STEP 12: Attach the tool drawer into front opening under control panel by dropping roller wheels into side channels.
Page 14 ASSEMBLY INSTRUCTIONS STEP 13: Place the heat distribution plates on lower level of grill body assembly directly above burners. Place porcelain cast iron cooking grills on support ribs directly above heat distribution plates. Place warming rack in grooves so that it sits above the cooking grills. STEP 14: Fasten Rotisserie motor bracket to grill body with 2 pieces 3/16’’x10mm philips head screws and 2pieces 3/16”...
Page 15 ASSEMBLY INSTRUCTIONS STEP 15: Unscrew the ignition battery cap. (Found at far-left of control panel) Insert battery into ignition box with positive terminal facing outward. Replace the ignition battery cap after the battery has been installed.
Page 16 ASSEMBLY INSTRUCTIONS STEP 16: Attach propane gas tank to regulator inlet fitting by turning the regulator clockwise as shown in figure below. LP gas cylinder must be fitted with a listed overfill prevention device (OPD). Secure liquid propone gas cylinder to the slide out tray using the gas cylinder retention screw.
Page 17: To Match Light The Grill
TO MATCH LIGHT THE GRILL 1. If the burner will not light after several attempts then the burner can be match lit. 2. If you’ve just attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate. Keep your face and hands as far away from the grill as possible.
Page 18: Gas Hook
GAS HOOK-UP Manifold pressure: 11 inches water column NEVER CONNECT AN UNREGULATED (W.C.). GAS SUPPLY LINE TO THE APPLIANCE. USE THE REGULATOR/HOSE L.P. GAS HOOK-UP ASSEMBLY SUPPLIED. Ensure that the rubber “O” Ring on the LP This is a liquid propane configured grill. cylinder valve are in place and that the Do not attempt to use a natural gas supply.
Page 19: Installer Final Check List
GAS HOOK-UP 5. When connecting regulator assembly to To disconnect L.P. gas cylinder: the valve, hand tighten the quick 1. Turn the burner valves off. coupling nut clockwise to a complete stop. Do not use a wrench to tighten. 2. Turn the tank valve off fully (turn Use of a wrench may damage the quick clockwise to stop).
Page 20: Leak Testing
LEAK TESTING GENERAL Only those parts recommended by the manufacturer should be used on the grill. Although all gas connections on the grill are leak tested at the factory prior to shipment, a Substitution will void the warranty. Do not use complete gas tightness check must be the grill until all connections have been performed at the installation site due to...
Page 21 CAUTIONS Place dust cap on cylinder valve outlet when the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane. The gas must be turned off at the supply cylinder when the unit is not in use.
Page 22: Operating Instruction
OPERATING INSTRUCTIONS GENERAL USE OF THE GRILL AND WARNING: IMPORTANT! ROTISSERIE USING THE SIDE BURNER: Each main burner is rated at 10,000 Inspect the gas supply hose prior to Btu/hr. The main grill burners encompass turning the gas “ON”. If there is evidence the entire cooking area and are side of cuts, wear or abrasion, it must be ported to minimize blockage from falling...
Page 23: Grill Lighting Instruction
OPERATING INSTRUCTIONS CAUTION: PLEASE TAKE OFF THE WARMING RACK WHEN USING THE ROTIS BURNER. THE HIGH HEAT COMING FROM THE ROTIS BURNER MAY CAUSE THE WARMING RACK TO BEND. GRILL LIGHTING INSTRUCTIONS WARNING: IMPORTANT! TO LIGHT THE GRILL BURNER: BEFORE LIGHTING… Make sure all knobs are “OFF”...
Page 24 GRILL LIGHTING INSTRUCTIONS If you’ve just attempted to light the burner WARNING: Always keep your face and body with the igniter, allow 5 minutes for any as far away from the burner as possible when lighting. accumulated gas to dissipate. Keep your face and hands as far away from the grill TO LIGHT THE SIDE BURNER as possible.
Page 25 GRILL LIGHTING INSTRUCTIONS...
Page 26 GRILL LIGHTING INSTRUCTIONS FLAME CHARACTERISTICS flame is noisy and tends to lift away from the burner, it indicates too much air. Check for proper burner flame characteristics. Burner flames should be blue and stable Each burner is adjusted prior to with no yellow tips, excessive noise, or shipment;...
Page 27: Lighting Illustration
LIGHTING ILLUSTRATION Main & Side Burner Lighting Illustration Rotisserie Burner Lighting Illustration Step 1. Make sure the Lid is open Step to light the Rotisserie Burner : Push and turn the rotisserie knob to “IGNITE/ON” position and hold down for 3-4 seconds then push electronic ignition button at the same time, until burner is lit.
Page 28: Care & Maintenance
CARE AND MAINTENANCE STAINLESS STEEL MAIN GRILL BURNER CLEANING The grill is made from non-rusting and Ensure the gas supply is off and the knobs non-magnetic stainless steel. There are are in the “OFF” position. Make sure the grill many different stainless steel cleaners is cool.
Page 29 CARE AND MAINTENANCE HOW TO REPLACE MAIN BURNER STAINLESS STEEL : Step 1. Insert the burner onto the orifice. There are many different stainless steel cleaners available. Always use the mildest cleaning procedure first, scrubbing in the direction of the grain. Do not use steel wool as it will scratch the surface.
Page 30: Trouble Shooting
TROUBLE SHOOTING SPIDER AND INSECT WARNING!!! WHEN TO LOOK FOR SPIDERS Spiders and small insects occasionally You should inspect the burners at least spin webs or make nests in the grill burner once a year or immediately after any of the tubes during transit and warehousing.
Page 31 TROUBLE SHOOTING CHECK LIST WHAT TO DO PROBLEMS Check to see if LP tank is empty. Grill won’t light when the control knob is rotated. Clean wire(s) and /or electrode by rubbing with alcohol and clean swab. Wipe with dry cloth. Make sure the wire is connected to electrode assembly.
Page 32: Exploded View
EXPLODED VIEW...
Page 33: Part List
Model No#720-0486 PARTS LIST DESCRIPTION DESCRIPTION REF# Q’TY REF# Q’TY Main Lid Grease Tray Temperature Gauge Top side panel w/Bracket,Right Logo Front Trim Piece,Right Spit Rod Regulator LP Rotisserie Motor Cart Basket Rotisserie Motor Bracket Side Panel ,Left Rotisserie Motor Bracket support...
Page 34: Operating Parts & Grilling Hints
ORDERING PARTS IMPORTANT REPLACEMENT HOW TO ORDER PARTS Use only factory authorized parts. The use of any part that is not factory authorized To make sure you obtain the correct can be dangerous. This will also void your replacement part(s) for your gas grill, warranty.
Page 35: Grill Cooking Chart
GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS AND FOOD THICKNESS FLAME SIZE TIME TIPS VEGETABLES Slice.Dot with butter or margarine Wrap in heavy-duty foil.Grill,turning occasionally Fresh Beets Medium 12 to 20 minutes Carrots Grill,turning once.Brush Occasionally Turnips With melted butter or margarine Onion 1/2 inch slices Medium...
Page 36 GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS FOOD THICKNESS FLAME SIZE TIME AND TIPS Tenderloin, Porterhouse, Remove excess fat from edge. Slash T-Bone, Sirloin remaining fat at 2-inch intervals. Rare 1 inch High 8 to 14 minutes Grill, turning once. 1-1/2 inch High 11 to 18 minutes...
Page 37 GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS FLAME SIZE FOOD THICKNESS TIME AND TIPS FISH AND SEAFOOD Grill,turning once.Brush with melted butter,margarine or oil Steaks To keep moist. Halibut 3/4 to 1 inch Medium to 8 to 15 minutes Salmon High Swordfish...
Page 38: Grill Recipe Suggestions
GRILL RECIPE SUGGESTIONS BBQ SALMON TANGY SEAFOOD KABOBS Half hour before cooking, turn the burner to the grill on full. Drain 1 lb. Large shrimp, shelled & 2 large salmon steaks deveined seafood reserving marinade. On 2 tbs. Oil each of twelve 10” skewers, ¾...
Page 39 GRILL RECIPE SUGGESTIONS Preheat grill. Combine cheese, Pound flank steak to ¼ inch In blender, process 1/3 c. water, condensed soup, milk, BBQ thickness or flatten chicken onion, soy sauce, 2 tsp. oil and sauce, oregano, salt and pepper breasts. Mix oil, lime juice and the next 8 ingredients until in a large mixing bowl.
Page 40 GRILL RECIPE SUGGESTIONS CHICKEN TANDOORI STYLE Marinade ribs for 3 hours. Use TURKEY marinade for basting by adding 8 large chicken thighs or 12 lb. turkey drumsticks beer to it. Place pan under the Beer basting sauce: ribs and baste frequently. To 1 c.
Page 41: Limited Warranty
Our obligation under this warranty is limited to repair or replacement, at our option, of the product during the warranty period. The extent of any liability of Nexgrill Industries, Inc. under this warranty is limited to repair or replacement. This warranty does not cover normal wear of parts, damage...