Panasonic TX-L32GW10 Operating Instructions Manual page 36

Tuning and Editing Channels
(DVB)
Set DVB channel manually
Normally use "Auto Setup" or "Update Channel List" to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.
●
All channels found will be added to the Channel List.
DVB-S:
DVB-S Manual Tuning
Signal Quality Analogue Scan
Signal Strength
Satellite
Transponder Frequency
Symbol Rate
Polarisation
Modulation
Service ID
Please consult the received satellite
broadcasting companies for the setting.
DVB-C:
DVB-C Manual Tuning
Frequency
Symbol Rate
Analogue Scan Signal Quality
Signal Strength
No. Channel Name
Free TV: 0 Pay TV: 0
Set Symbol Rate, and then perform this function.
●
Normally set Symbol Rate "Auto".
DVB-T:
DVB-T Manual Tuning
Frequency
Signal Quality Analogue Scan
Signal Strength
No. Channel Name
Free TV: 0 Pay TV: 0
Set where the level of "Signal Quality" becomes the maximum.
Update DVB channel automatically
You can add new channels, delete removed channels, update channel name and position automatically to
Channel List.
DVB-T Update Channel List
Progress Analogue Scan
This will take about 3 minutes.
CH Channel Name
Free TV: 0 Pay TV: 0
36
Set the satellite
21 0 10 68
0 10
Astra 19.2° E
10847 MHz
Auto
Horizontal
Auto
Auto
Enter the frequency
474,00 MHz
Auto
21 0 10 68
0 10
Type New
Radio: 0 Data: 0
Stopped
[CH21] 474,00 MHz
21 0 10 68
0 10
Type New
Radio: 0 Data: 0
Stopped
●
Channel List is updated with keeping your settings in Favourites Edit,
CH 21 21 68 68
Channel List, Child Lock, etc.
Type Quality
●
To update DVB-S channels, the satellite, search mode and scan mode
Radio: 0 Data: 0 settings are required before updating.
Searching
DVB-S Auto Setup Settings
Satellite
Search Mode
Scan Mode
Manual Tuning
Set "Transponder Frequency",
"Symbol Rate", "Polarisation",
"Modulation" and "Service ID"
set
select
Search
Search
adjust frequency
select channel
Update Channel List
Astra 19.2° E
Free Channels
Quick
set
select
store
set
select
Search