Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Craftex CX901
- Page 1 CX901 2" BRAD NAILER User Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS General Safety Instructions for Pneumatic Tools ........... 3 CX901 Specific Safety Instructions ................ 4 CX901 Features ..................... 5 Unpacking ......................6 Inventory......................... 6 Safety Nose Mechanism ..................6 Oiling the Nailer...................... 7 Loading the Nailer ....................7 Operating the Nailer .................... -
Page 3: General Safety Instructions For Pneumatic Tools
GENERAL SAFETY INSTRUCTIONS FOR PNEUMATIC TOOLS Extreme caution should be used when operating all pneumatic tools. Know your tool, be familiar with its operation, read through the user manual and practice safe usage procedures at all times. Keep all guards and safety devices in Always use the right tool. -
Page 4: Cx901 Specific Safety Instructions
CX901 – 2" BRAD NAILER SPECIFIC SAFETY INSTRUCTIONS Read and follow all the instructions Do not use a check valve or any other and safety precautions in the user fitting that allows air to remain in the manual before operation. -
Page 5: Cx901 Features
FEATURES MODEL CX901 –2" BRAD NAILER As part of the new line of Craftex CX-Series Pneumatic Tools, we are proud to offer the CX901 2" Brad Nailer. By following the instructions and procedures laid out in this user manual, you will receive years of excellent service and satisfaction. -
Page 6: Unpacking
UNPACKING SAFETY NOSE MECHANISM The tool is properly packaged and shipped in a box. When unpacking, carefully inspect CX901 features safetu nose that the nailer has not been damaged mechanism which protects against during transit. accidental firing. When the trigger is pressed, the nailer will not fire until the safety nose mechanism is depressed. -
Page 7: Oiling The Nailer
OILING THE NAILER OPERATING THE NAILER The CX901 Brad Nailer needs to be Before operating the nailer, make sure you lubricated before every use. Place three to have read and understood the instructions four drops of pneumatic tool oil (provided) given in this manual. -
Page 8: Removing The Jammed Nails
REMOVING JAMMED CLEANING NAILS Always keep the nailer clean from dust, chips, sand and etc, in the air connectors or Sometimes the nail gets jammed. Jammed into the body. nail must be removed before using the nailer again. Use a good solvent to clean the nose assembly of the nailer and make sure the To clear the jammed nail: nailer is dry before using it again. -
Page 12: Warranty
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras. Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to property or for incidental contingent, special or consequential damages arising from the use of our products.
Need help?
Do you have a question about the CX901 and is the answer not in the manual?
Questions and answers