Table of Contents
Advertisement
Quick Links
WARNING:
This Unit employs Components that tend to produce arcs or sparks – To
prevent fire or explosion, do not install in compartments containing
batteries or flammable materials - SHOCK HAZARD. DO NOT OPEN.
CAUTION:
OUTPUT NON-SINUSOIDAL REFER TO MANUAL - Provided with integral
protection against overloads. To prevent fire, do not cover or obstruct
ventilation openings. Do not mount in Zero-Clearance compartment.
Overheating may result.
Notice :
The output of this device is not sinusoidal. It has a total harmonic distortion
of 30% percent and maximum single harmonic of 8 percent
©2016 Energizer Energizer and other marks, including graphics, are trademarks of Energizer and used
under license by PowerBright. All other trademarks, brand names or product names are the property of
their respective owners and are not affiliated with Energizer or Bright Manufacturing LLC.
Toll Free: 1 866.295.6775
www.energizerpower.com
Printed in China
EN548
Owner's Guide
4010229
Conforms to UL Std.458,
Cert. to CSA Std. C22.2 No 107.1
Advertisement
Table of Contents
Summary of Contents for Energizer EN548
- Page 1 30% percent and maximum single harmonic of 8 percent ©2016 Energizer Energizer and other marks, including graphics, are trademarks of Energizer and used under license by PowerBright. All other trademarks, brand names or product names are the property of their respective owners and are not affiliated with Energizer or Bright Manufacturing LLC.
-
Page 2: Important Safety Information
AC outlet and USB port. Read this guide before connecting or using the EN548 and save it for future reference. We hope you enjoy using your EN548 and if you require any assistance, please contact our help desk: www.energizerpower.com or toll free: 1.866.295.6775 2. - Page 3 Warnings and Cautions The EN548 housing may become uncomfortably warm, reachi n g 140° F (60° C) under extended high power operation. During operation, keep away from materials that may be a ected by high temperatures. EN548 Do not use the...
- Page 4 CAUTION: Risk of Fire. Do not replace any vehicle fuse with a rating higher than recommended by the Vehicle Manufacturer. Ensure that the electrical system in your vehicle can supply this product without causing the vehicle fusing to open. Information on the vehicle fuse rating is typically found in the vehicle operator’s manual.
- Page 5 CAUTION Do not connect live AC power to the EN548 AC outlets. This will damage the inverter, and the damage is not covered by warranty. Do not connect any AC load that has its neutral...
-
Page 6: Additional Safety Guidelines
Do not expose the to water, rain, EN548 snow, or spray. Failure to follow these safety guidelines may cause personal injury and/or damage to the EN548 It may also void your product warranty. 3. Safety Features • Overload protection with automatic shutdown •... -
Page 7: Inverter Features
4. Inverter Features EN548 Front Back LED Light ON/OFF Power Button Cooling USB port 2.4 Amp Connectors AC Outlets... -
Page 8: Using The Inverter
5. Using the Inverter EN548 Through its AC outlet, the is capable of powering most 120V AC products that use 500W or less. The EN548 can also power or charge most consumer electronics that have USB power ports. EN548 AC output waveform, called “modified sine wave”... - Page 9 Plug a DC cable into the DC cable port on the EN548 and connect to a 12V cigarette lighter receptacle. Plug the device you want to operate into the EN548 When the inverter is not in use, unplug it from the 12V outlet to prevent slight discharge of the battery.
-
Page 10: Inverter Operation
Operating Guidelines • As the battery is used, its voltage begins to fall. When the EN548 senses that the voltage at its DC input has dropped to 10.5V, the inverter automatically shuts down and the light glows RED, indicating a fault. This prevents the battery from being damaged. - Page 11 They are not inten de d for con stan t de ep discharge . Regularly operating the EN548 from a vehicle battery until low-voltage shu tdown occurs will shorten the life of the battery.
-
Page 12: Battery Operating Time
The EN548 can operate while the engine is running, but the normal voltage drop that occurs during starting of the engine may trigger the... -
Page 13: Interference With Electronic Equipment
Buzzing sound in audio systems and radios Some inexpensive stereo systems and AM-FM radios have inadequate internal power supply filtering and will “buzz” slightly when powered by the EN548 Generally, the only solution is an audio product with a higher quality filter. -
Page 14: Troubleshooting
7. Troubleshooting PROBLEM: AC product will not operate, no inverter lights are Possible cause Solution Battery is defective. Check battery and replace if required. Loose connections. Check connections. PROBLEM: Measured inverter output is too low. Possible cause Solution Standard “average- Inverter’s “modi ed sine reading”... - Page 15 Possible cause Solution Battery voltage is too low. Recharge battery. PROBLEM: AC product will not operate, RED FAULT light ON. Possible cause Solution AC product(s) connected Use a product with a power are rated at more than the rating less than the inverter’s inverter’s continuous continuous power rating.
- Page 16 Specifications: EN548 Specifications Description Output Continuous Watts (W) 500 W + 48W（USB） 1000 W Surge Capacity (Peak Power) Rated Input DC (V,A) 13VDC, 45A 10.5 to 15.5 VDC Input Voltage Range 60 Hz±1 Rated Frequency (Hz) 4.17A(105-125) Rated Output AC (V,A) 4 * 2.4A max.9.6A (iPad)
- Page 17 Specifications: EN548 (continued) Specifications Description Modifed Sine Wave Output Wave Form 65°C Max Max. Touch Temperature 0° to 40°C Operating Temperature 5 to 95% Operating/Storage Humidity RH Fan Cooling over temperature Cooling System 0.65 Min Power Factor <250mV Ripple & Noise(Peak to Peak) 8.3 x 5.15 x 2.3...
-
Page 18: Warranty And Return
This Limited Warranty is provided by PowerBright andcovers defects in workmanship and materials in your EN548. This warranty period lasts for 24 months from the date of purchase at the point of sale to you, theoriginal end user customer. You are required to have proofof purchase to make warranty claims. - Page 19 shipment to the customer, whichever is greater. All replaced products and all parts removed from repaired products become the property of PowerBright. PowerBright covers both parts and labor necessary to repair the product, and return shipment to the customer via a PowerBright selected non-expedited surface freight within the contiguous United States and Canada.
- Page 20 What does this warranty not cover? This Limited Warranty does not cover normal wear and tear of the product or costs related to the removal, installation, or troubleshooting of the customer's electrical systems. This warranty does not apply to, and PowerBright will not be responsible for, any defect in or damage to: the product if it has been misused, neglected, improp- erly installed, physically damaged or altered, either...
- Page 21 SHOULD NOT BE USED IN CONNECTION WITH LIFE SUPPORT SYSTEMS OR OTHER MEDICAL EQUIPMENT OR DEVICES. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, POWERBRIGHT MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE USE OF THE ENERGIZER EN548 IN CONNECTION WITH LIFE SUPPORT SYSTEMS OR OTHER MEDICAL EQUIPMENT OR DEVICES.
-
Page 22: Return Material Authorization Policy
Return Material Authorization Policy Before returning a product directly to PowerBright you must obtain a Return Material Authorization (RMA) number and the correct factory "Ship To" address. Products must also be shipped prepaid. Product shipments will be refused and returned at your expense if they are unauthorized, returned without an RMA number clearly marked on the outside of the shipping box, if they are shipped... -
Page 23: Return Procedure
Return Procedure Package the unit safely, preferably using the original box and packing materials. Please ensure that your product is shipped fully insured in the original packaging or equivalent. This warranty will not apply where the product is damaged due to improper packaging.