Displayed Messages - AEG PE3811-M Instructions Manual

DISPLAYED MESSAGES

DISPLAYED MESSAGE
FILL TANK
GROUND TOO FINE ADJUST
MILL AND
(alternating with)
PRESS OK
GROUND TOO FINE ADJUST
MILL AND
(alternating with)
PRESS OK
(then)
FILL TANK
EMPTY WASTE COFFEE
CONTAINER
INSERT WASTE COFFEE
CONTAINER
POSSIBLE CAUSE
• The water tank is empty or
positioned incorrectly.
• The grinding is too fine
and the coffee is delivered
too slowly.
• The machine cannot make
coffee as there is air in the
hydraulic circuit
Possible cause: the filter
has not been installed cor-
rectly.
• The tank has been remo-
ved during delivery.
• The waste coffee contai-
ner (A4) is too full or
more than 3 days have
passed since you last
made coffee (this guaran-
tees correct hygiene of the
machine).
• After cleaning, the waste
coffee container has not
been replaced.
25
REMEDY
• Fill the tank with water
and/or insert it correctly,
pushing it as far as it will
go.
• Turn the grinding adju-
stment knob one click
clockwise towards "7".
• Make sure the filter (A26)
is propertly installed and
that the installation has
been carried out correctly.
• Insert the tank and press
the OK icon (B9). "HOT
WATER PRESS OK" is di-
splayed.
• Empty the waste coffee
container and clean, then
replace.
Important: when remo-
ving the drip tray, the
waste coffee container
MUST be emptied, even if
it is not completely full.
If this is not done, when
you make the next cof-
fees, the waste coffee
container may fill up more
than expected and clog
the machine.
• Open the service door and
insert the waste coffee
container.
GB