Tp Search; Rt (Radio Text) - Denon AVR-1708 Owner's Manual

ENGLISH
<SOURCE SELECT>
<ON/STANDBY> <PRESET CHANNEL> <RT>
[Front]
[1]
[6], [7]
[8], [9]
[uip]
[MODE
SELECTOR 1]
[Rear]
[iPod]
[MODE]
[uip]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
38

TP Search

<RDS>
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Either turn
select "TUNER".
2
[MODE SELECTOR 1]
Set
(vpage 42 "Remote Control Unit Operations")
3
Press
display.
4
Press
[CHANNEL]
TP search begins automatically.
b If no TP station is found with the above operation, all the reception
bands are searched.
[2]
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
[ENTER]
[STATUS]
[MODE
SELECTOR 2]
[TUNER]
[ENTER]
<SOURCE SELECT> [TUNER]
or press
to "AUDIO".
<RDS>
until "TP SEARCH" appears on the
<PRESET CHANNEL> [CHANNEL]
or .

RT (Radio Text)

"RT" appears on the display when radio text data is received.
1
<SOURCE SELECT>
Either turn
to
select "TUNER".
2
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 42 "Remote Control Unit Operations")
3
<RT>
Press .
b While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
b To turn the display off, press <RT>.
b If no text data is being broadcast, "NO TEXT DATA" is displayed.
[TUNER]
or press to