Advertisement
■
Operation
Turn ON： In the state of power-off, press and hold the power button for 1sec, the headset will
send out two "di-di" Prompt tones and blue LED will be on ; the blue and red LED light will
glitters in turn if holding power button for 4 sec.
Turn OFF ： In the state of power-on, press and hold power button for 3 seconds till the blue
There will be four "dodo" voices from loud to low. Now the unit
LED light glitters three times.
is turned off.
Pairing： In the state of power-off , press and hold power button for 3s until red and blue LED
light glitters in turn, the headphone enters into pairing mode.
In this case, the headset can be
paired with the Bluetooth enabled device.
※ Usually ， Setup procedure relates to the "setup"," connection" or "Bluetooth" menu in your
mobile phone or Bluetooth device. Click "search for Bluetooth device", your phone will find the
headphone name "513" or similar pairing name and ask if you want to connect, then click
"confirm" or "yes". Afterwards, input the pairing password or PIN code "0000" and click "yes" or
"confirm", the headphone will connect with your Bluetooth device successfully.
※ The headphone will enter in power-on mode if releasing power button before red and blue
LED light glitters in turn. In this case, please turn off the power and operate it once again.
Answering calls: Press the power button once to answer the incoming calls.
If the headset is paired with the mobile phone, dialing the numbers on the cell
Dialing calls:
phone will enable the conversation on the headset automatically .
Ongoing conversation on cell phone can be ended by pressing the power key
Ending calls:
once.
The cell phone will automatically dial the last dialed phone number
Redial latest number:
by double pressing power key on the Bluetooth headset. We can hear the prompt tone from
the headset.
toggle switch upwards to increase the
Volume control: In the state of music or calls, move
sound and move it downwards to decrease the sound.
Previous /Next: Move the toggle switch upwards and hold it for a short while to come to
previous song, then move the toggle switch downwards and hold it for a short while to come to
next song.
Pause /Play: Press the toggle switch button inside to pause or play the music.
Advertisement
