Table of Contents
Advertisement
External Connection
Connecting Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Digital Audio System
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.
1. Connect an Optical Cable between the SPDIF jacks on the TV and the Digital Audio Input
jacks on the Digital Audio System. When a Digital Audio System is connected to the
SPDIF terminal: Decrease the gain (volume) of the TV, and adjust the volume level with
the
Digital Audio System's
Connecting Amplifier/DVD Home Theater
Amplifier/
DVD Home Theater
Audio Cable
(Not supplied)
OUT
IN
AV
HDMI 2
HDMI 1
Coaxial Cable (Not supplied)
volume control.
OUT
IN
AV
HDM I 2
HDM I 1
Each external input source device has a different
back panel configuration. When connecting an
external device, match the color of the connection
terminal to the cable.
1. Connect Audio Cables between the AUDIO L
and R OUT on the TV and AUDIO IN [R-
AUDIO-L]on the Amplifier/DVD Home Theater.
When an audio amplifier is connected to the AV
OUT [R-AUDIO-L] terminals: Decrease the gain
(volume) of the TV, and adjust the volume level
with the Amplifier's volume control.
Note: 1. Whenever you connect an external device
2. When connecting an external device,
22
IN
AUDIO
VGA
IN
AUDIO
VGA
to your TV, make sure that power on the
unit is turned off.
match the color of the connection terminal
to the cable.
OUT
ANT
SPDIF
TV Rear Panel
OUT
ANT
SPDIF
TV Rear Panel
Advertisement
Table of Contents
