Summary of Contents for Daikin BRC4C82
- Page 1 INSTALLATION MANUAL Wireless Remote Controller Kit MODELS BRC4C82 Read these instructions carefully before installation. Keep this manual in a handy place for future reference. This manual should be left with the equipment owner.
-
Page 2: Safety Considerations
Wireless Remote Controller Kit Installation manual CONTENTS • The installation position of this receiver is one corner of the decoration panel. Therefore, confirm that its position 1. SAFETY CONSIDERATIONS.......... 2 is set so that the signal from the wireless remote control- 2. -
Page 3: Receiver Installation
• When operating, point the transmitting part of the remote controller in the direction of the receiver. Unit No. No.1 No.2 No.3 • The direct transmitting distance of the remote controller is Wireless address approximately 23 ft.. switch • The signal cannot be transmitted if something such as cur- (SS2) tains blocks the receiver and the remote controller. - Page 4 4-5. Attaching the receiver (for ceiling installation) • Attach the upper part of receiver (1). 1. Prepare the ceiling for the receiver. • Open a hole in the ceiling for the receiver. (Use paper pat- tern printing (9)). (Install the upper part on the lower part being careful parts are facing in the correct direction.
- Page 5 3. Attach the upper part of remote controller. (3) Press the “ ” button and “ ” button to set the (Install the upper part on the lower part being careful parts DOWN address. are facing in the correct direction. After installation, turn on the power, and test emergency run button.) Address can be set from 1 to 6, but set it from 1 to 3 and to same address as the receiver.
-
Page 6: Field Setting
FIELD SETTING FIRST SECOND CODE NO. MODE CODE If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be changed. Refer to the instruc- tion manual (optional hand book ) for each optional accessory. Approx. - Page 7 3P155845-4C EM05A013 (0505)