Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Note: Blade sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17j
Advertisement
Summary of Contents for Chicago Electric 61969
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 61969... - Page 3 10. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. Item 61969 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 The blade result in a risk of injury to persons. retaining nut/bolt should be checked periodically and tightened if necessary, especially after braking. 21. When servicing use only identical replacement parts. Page 4 For technical questions, please call 1-888-866-5797. Item 61969...
-
Page 5: Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 61969 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Specifications
CLASS IIa LASER PRODUCT This product complies with 21 CFR 1040.10 and 1040.11 Distributed by Harbor Freight Tools 3491 Mission Oaks Blvd. Camarillo, CA 93011 61969 Manufacture Date: ___________, ______ Page 6 For technical questions, please call 1-888-866-5797. Item 61969... -
Page 7: Setup
Mounting Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included. Item 61969 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Lock Lock Trigger Lower Guard Dust Collection Blade Slide Lock Knob Bevel Angle Clamp Indicator Bevel Lock Knob Fence Turntable Table Miter Extension Miter Scale Kerf Board Miter Lock Knob Page 8 For technical questions, please call 1-888-866-5797. Item 61969...
- Page 9 Loosen this to allow the cutting head to slide. Note: Additional functions are explained Align pin with Align pin with elsewhere in the manual. deep groove shallow groove to lock cutting head. to unlock cutting head. Item 61969 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 9. Rotate the Guard Pivot Plate (132) back into place, and secure it with the Guard Pivot Bolt (193). 10. WARNING! Make sure the Lower Guard (133) operates smoothly and properly protects from the Blade before using the saw. Page 10 For technical questions, please call 1-888-866-5797. Item 61969...
- Page 11 Adjust both sides of the Fence clear of the Blade's Indicator cutting path after making any adjustment to the Figure C cutting angle. Move the Blade through its full range of motion to ensure the Fences are clear. Item 61969 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Clamping the workpiece will also improve cutting accuracy by preventing the workpiece from moving during the cutting operation. Page 12 For technical questions, please call 1-888-866-5797. Item 61969...
- Page 13 Saw. 10. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. Item 61969 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Maintenance
NOTE: The square must contact the surface of tighten the Bolts firmly in place and reinstall the blade, not the teeth, for an accurate reading. the Extension Lock (15). Recheck one last time, then proceed to work. Page 14 For technical questions, please call 1-888-866-5797. Item 61969... - Page 15 Blade clears the Kerf Board. To adjust the Kerf Board: 5. Tighten the four screws holding 1. Lower the Saw Blade and lock it the Kerf Board in place. down with the Locking Pin. Item 61969 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 2. Depth Stop set too shallow. 2. Adjust Depth Stop Bolt for desired depth of cut. through workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 61969...
-
Page 17: Parts List And Diagram
Ø8 Fender Washer Bevel Lock Knob M8 Nut Ø45 x Ø 30 x 5 0 Slide Bushing Bevel Scale Slide Rail Ø2 x 4 Rivet Ø4 Spring Washer Item 61969 For technical questions, please call 1-888-866-5797. Page 17... - Page 18 131 M6 x 7 Flat Head Bolt 191 ST3.2 x 6 Cross Screw 132 Guard Pivot Plate 192 Connector 133 Lower Guard 193 M6 x 1 0 Guard Pivot Bolt 134 Turntable Plate Page 18 For technical questions, please call 1-888-866-5797. Item 61969...
- Page 19 Assembly Diagram (1 0) Item 61969 For technical questions, please call 1-888-866-5797. Page 19...
-
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 61969 and is the answer not in the manual?
Questions and answers
I need item # 17 the right fence extension for miter saw 61696
The correct fence extension part number for the Chicago Electric miter saw model 61969 is not explicitly stated in the provided context. However, the complete fence assembly for model 61969 is available and should include the necessary parts. The fence will not fit other models such as 61970.
This answer is automatically generated
how do i find part numbers and parts for 61969 miter saw
You can find parts and part numbers for the Chicago Electric 61969 miter saw in the parts list section of the manual. The list includes item names, quantities, and part numbers, such as the Zero Stop Lock Nut, Kerf Board, Turntable, Miter Indicator, Bevel Lock Knob, and Belt Guard. If you need technical assistance or to order parts, you can call 1-888-866-5797.
This answer is automatically generated
How do I order a part from this emmanuel