Table of Contents
Advertisement
If the target destination does not appear, take one of the following steps:
• Display the destination by selecting its initial letter from the title
• Display the destination by pressing [U] or [T]
Note
❒ Depending on the security setting, some destinations may not appear in
the destination list.
Selecting destinations by entering the registration numbers
Select the destination from the machine's address book using its registration
number.
A
Press [Reg. No.].
B
Using the number keys, enter the five-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press {q} after the last number.
Example: To enter 00003 Press {3}, and then press {q}.
C
Press [OK].
By pressing [Change], you can change the selected destination.
Specifying E-mail Destinations
1
19
Advertisement
Table of Contents
