26
Chapter 2 Installing BBU
This chapter describes the installation of the BBU in the server.
1. Installation Procedure
Install the BBU in the server in the following procedure.
Check
1-1. Selecting and Installing Bracket
The BBU is originally equipped with the full-height PCI bracket. To install the BBU to a
low-profile PCI slot, the full-height PCI bracket must be replaced with the low-profile PCI
bracket coming with the BBU.
1.
Remove the screws (2) fixing the full-height PCI bracket to the BBU.
2.
Remove the full-height PCI bracket.
3.
Install the low-profile PCI bracket.
4.
Fix the low-profile PCI bracket to the BBU with the screws (2) removed in step 1
above.
Before starting the installation job, refer to the User's Guide of the disk
array controller and that of the server.
Full-height PCI bracket
Low-profile PCI bracket