Advertisement
V-9131 User Guide v2.qxd:9131 User Guide
8. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: The cleaner won't run.
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in firmly.
Cause:
No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause:
ON/off switch not turned on.
Solution: Push on/off switch to 'on' .
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Dust bag is full.
Solution:
Switch off and unplug cleaner.
Empty dust bag.
Cause:
Hose is blocked.
Solution:
Remove hose and clear obstruction.
Cause:
Filters blocked.
Solution:
Replace filters - refer to section 9.
29/5/08
9. UK Service & Help
Vax Care 0870 6061248
Monday-Friday
Saturday-Sunday
An answerphone is available outside of these hours. Any
queries or concerns about using the Vax, call the Vax
Careline. Calls are charged at the UK national rate.
Please make a note of the serial number and model
number of the carpet cleaner before calling. There are
over 400 approved Vax Service Agents in the UK. For the
nearest Service Agent, please call the Vax Careline.
www.vax.co.uk
10. Technical Specification
Voltage:
Wattage:
Capacity:
Cord length:
Weight:
Subject to technical change without notice.
troubleshooting / uk service & help / technical specification
16:49
Page 7
Vax Careline
8.00am to 6.00pm
9.00am to 5.00pm
220-240V ~50Hz
1300 W
Clean water tank - 4.0 litres
Dirty water tank - 8.0 litres
7.5 metres
7.5kg
0870 606 1248
7
Advertisement
