Vivitar vivicam S048 User Manual page 7

 The energy status of the power is displayed on LCD as shown below:
Full battery power
MICRO SD MEMORY CARD
Make sure a Micro SD Memory card (up to 32BG) has been properly inserted into your camera.
Micro SD Memory card Class 4 or higher is required. Micro SD Memory card not included.
To properly insert the Memory Card:
1) Make sure the camera is powered off.
Move the Lock/Unlock Switch on the battery cover to unlock the cover.
Open the battery/memory card compartment door.
2) Insert the Micro SD Card into the slot in the direction shown on the camera (see SD icon by
the Micro SD card slot).
3) Push the Micro SD Card until you hear a slight clicking sound. This indicates the memory
card has been inserted correctly.
4) Close the battery cover, replace the Lock/Unlock Switch to lock the cover.
NOTE:
 There is only one right direction to insert the Micro SD memory card into the slot. Do not force
the card into the memory card slot, since it may damage both the camera and the Micro SD
memory card.
 After the camera is powered on, a memory card icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.
Medium battery power
6
Low battery power