Table of Contents
Advertisement
S S e e t t u u p p
Receiving a Fax or Data File
To receive a fax or data, ensure that your phone is
connected to your PC and is powered on and select a
desired option.
When you receive a fax call, setup the Answer mode in
the Fax program on your PC and click on Receive and
select one of the following:
• Automatic Receive (recommended)
• Manual Receive
Sending a Fax or Data File
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone functions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
82
Whisper Mode
Whisper mode automatically increases the receiving
sensitivity of the microphone to obtain the maximum
quality of a call even when you speak in a softer voice
so that the caller can hear you as if you are speaking
normally.
Note: It is not recommended that the ear piece be used
while using Whisper mode. Audio level may increase
without notice depending on the surrounding
conditions.
Select On to use this mode, or Off not to use it.
Key Guard
You can make the keypad lock manually by pressing and
holding
in standy mode. You can prevent accidental
key pressing with this key guard mode.
When this menu option is set to On, in standyby mode
the key guard will activate automatically after the
predetermind amount of time.
To unlock you keypad, press
Note:When you have incoming calls and SMS
messages in key guard mode the key guard is
deactivated automatically, after then you get the
standby mode the key guard will activate
automatically after the predetermined amount of time.
Turning on the backlight by pressing and holding
in key guard mode.
S S e e t t u u p p
Menu 8-8
Menu 8-9
and hold
.
83
Advertisement
Table of Contents
