1. Manuals
  2. Brands
  3. Portwell Manuals
  4. PCI Card
  5. WADE-8021
  6. User manual

Portwell WADE-8021 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

WADE-8021
User's Manual
Version 1.0
Copyright © Portwell, Inc., 2014. All rights reserved.
All other brand names are registered trademarks of their respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WADE-8021 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Portwell WADE-8021

Summary of Contents for Portwell WADE-8021

  • Page 1 WADE-8021 User's Manual Version 1.0 Copyright © Portwell, Inc., 2014. All rights reserved. All other brand names are registered trademarks of their respective owners.

  • Page 2: Table Of Contents

    Preface Table of Contents How to Use This Manual Chapter 1 System Overview.......................1-1 1.1 Check List......................1-1 1.2 Product Specification..................1-1 1.2.1 Mechanical Drawing................1-4 1.3 System Architecture..................1-6 Chapter 2 Hardware Configuration ...................2-1 2.1 Jumper Setting ....................2-1 2.2 Connector Allocation..................2-4 Chapter 3 System Installation....................3-1 3.1 Intel Socket P 32 nm (988 Pin) Processor ...........

  • Page 3: How To Use This Manual

    Preface How to Use This Manual The manual describes how to configure your WADE-8021 system board to meet various operating requirements. It is divided into five chapters, with each chapter addressing a basic concept and operation of Single Host Board.

  • Page 4: Chapter 1 System Overview

    Based on latest mobile Intel® QM67 Express chipset, WADE-8021 takes advantage of Intel® Core™ i5 / i7 processor which has high performance and excellent power management features. WADE-8021 not only supports dual display by VGA / DVI / LVDS and the third display via PCI-Express expansion slot. In addition, with its display-enriched interface, WADE-8021 can support various multimedia devices.
  • Page 5 VGA Card Onboard Intel® HD Graphics Family (Sandy Bridge) VGA Driver Onboard Intel® HD Graphics Family Version 6.14.10.5328 LAN Card Onboard Intel® 82574L/82579LM Gigabit Network Connection t ll LAN Driver Intel® 82574L/82579LM Gigabit Network Connection Version 11.7.32.0/11.8.84.0 WADE-8021 User’s Manual...
  • Page 6 1.20A 1.74A System+ Device +5V 2.69A 3.20A 3.63A USB Loading Test 4.77 V/ 500 mA  Operating Temperature 0 °C ~ 60 °C  Storage temperature -20 ~ 80 °C  Relative Humidity 0% ~ 90%, non-condensing WADE-8021 User’s Manual...

  • Page 7: 1.2.1 Mechanical Drawing

    System Overview 1.2.1 Mechanical Drawing WADE-8021 User’s Manual...
  • Page 8 System Overview WADE-8021 User’s Manual...

  • Page 9: 1.3 System Architecture

    System Overview 1.3 System Architecture All of details operating relations are shown in WADE-8021 System Block Diagram. WADE-8021 System Block Diagram WADE-8021 User’s Manual...

  • Page 10: Chapter 2 Hardware Configuration

    Hardware Configuration This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on WADE-8021 are in the proper position. The default settings shipped from factory are marked with an asterisk ().
  • Page 11 5-6, 9-11, 10-12, 15-17, 16-18 Short RS-232 　 3-4, 7-9, 8-10, 13-15, 14-16, 21-22 Short RS-422 1-2, 7-9, 8-10, 19-20 Short RS-485 JP7 : PANEL Voltage Selection Pin No. Function 1-3 Short VCC3 　 3-5 Short 3-4 Short +12V WADE-8021 User’s Manual...
  • Page 12 JP8: PANEL BACKLIGHT Selection Pin No. Function 1-3, 2-4 5V, Active High 　 1-3, 4-6 12V, Active High 3-5,2-4 5V, Active Low 3-5,4-6 12V, Active Low JP10: CMOS Clear Pin No. Function Open Normal Operation 　 short Clear CMOS Contents WADE-8021 User’s Manual...

  • Page 13: Connector Allocation

    SATA Power Connector FAN_4pin (CPU FAN) Power Connector J18/J20 External USB Connector PCIe x 16 SLOT J21/J22 SATA GEN3 Connector ATX Power Connector Mini-PCIe Connector COM1 Connector JP3/JP4 SMBUS Connector Front Panel Pin HDR LPC Port 80H WADE-8021 User’s Manual...
  • Page 14 PIN No. Signal Description PIN No. Signal Description GPIO70 GPIO74 GPIO71 GPIO75 GPIO72 GPIO76 GPIO73 GPIO77 Ground Note: All General Purpose I/O ports can only apply to standard TTL ± 5% signal level (0V/5V), and each Fan. WADE-8021 User’s Manual...
  • Page 15 J13 : LVDS Connector PIN No. Signal Description PIN No. Signal Description LVDS_VDD LVDS_VDD LVDSA_DATA0 LVDSA_DATA#0 LVDSA_DATA1 LVDSA_DATA#1 LVDSA_DATA2 LVDSA_DATA#2 LVDSA_DATA3 LVDSA_DATA#3 LVSDA_CLKP LVDSA_CLKN LVDS_DDC_CLK LVDS_DDC_DATA Ground Ground LVDSB_DATA0 LVDSB_DATA#0 LVDSB_DATA1 LVDSB_DATA#1 LVDSB_DATA2 LVDSB_DATA#2 LVDSB_DATA3 LVDSB_DATA#3 LVSDB_CLKP LVDSB_CLKN Ground Ground WADE-8021 User’s Manual...
  • Page 16 Hardware Configuration J15/J16 : SATA Power Connector PIN No. Signal Description Ground J17: CPU Fan Connector PIN No. Signal Description Ground +12V Fan on/off output Fan Speed control WADE-8021 User’s Manual...
  • Page 17 5V Dual is always available. It's supplied by either 5V VCC power source in normal operation mode or 5V standby power source in standby mode. J21/J22 : SATA GEN3 Connector PIN No. Signal Description Ground Ground Ground WADE-8021 User’s Manual...
  • Page 18 Hardware Configuration JP1 : COM1 Connector PIN No. Signal Description PIN No. Signal Description Ground JP3/JP4 : SMBUS Connector PIN No. Signal Description SMB_CLK SMB_DAT Ground WADE-8021 User’s Manual...
  • Page 19 HDD_LED(+) PWR_LED(+) HDD_LED(-) PWR_LED(-) Reset (-) Power On(+) Reset (+) Power On(-) Ground Ground JP6 : LPC Port 80H Connector PIN No. Signal Description PIN No. Signal Description LAD0 VCC3 LAD1 PLT_RST# LAD2 LFRAME# LAD3 Ground WADE-8021 User’s Manual 2-10...

  • Page 20: Chapter 3 System Installation

    CPU gently until it fits into place. If this operation is not easy or smooth, don’t do it forcibly. You need to check and rebuild the CPU pin uniformly. 3) Turn the latch of actuator to lock processor chip into the socket once CPU fits. WADE-8021 User’s Manual...

  • Page 21: Main Memory

    4) Follow the steps of installing a CPU to change to another one or drive latch to close the opened actuator. WADE-8021 will support the CPU of Intel 32nm Core 2 Duo & Celeron Processor for Mobile can be detected automatically .

  • Page 22: Installing The Single Board Computer

    3.3.1 Chipset Component Driver WADE-8021 uses state-of-art Intel® QM67 chipset .It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 2000/XP, please install its INF before any of other Drivers are installed.

  • Page 23: Audio Controller

    Windows 2000/XP . 3.3.5 Intel® Active Management Technology (Intel® AMT) Please find the Intel ME Firmware 7.0 driver from WADE-8021 CD-title. The drivers support Windows 2000/XP Clear CMOS Operation The following table indicates how to enable/disable Clear CMOS Function hardware circuit by putting jumpers at proper position.
  • Page 24 Set_Register(unsigned char offset, unsigned char value) { outportb(SIO_Port, offset); outportb(SIO_Port+1, value); printf("Write offset:%x = %x\n", offset, value); int main(void) { printf("test string\n"); Enter_IT872x_SIO(); Set_LDN(GPIO_LDN); Set_Register(0x72, 0xC0); Set_Register(0x73, 0x05); printf("System will reset in 5 seconds\n"); return 0; WADE-8021 User’s Manual...

  • Page 25: Gpio

    I/O function. GPIO Pin Assignment The WADE-8021 provides 8 input/output ports that can be individually configured to perform a simple basic I/O function. Users can configure each individual port to become an input or output port by programming register bit of I/O Selection. To invert port value, the setting of Inversion Register has to be made.
  • Page 26 (void) outportb(Superio2_Addr, 0xAA); void Set_CFG2 (unsigned char Addr2,unsigned char Value2) unsigned char d2; outportb(Superio2_Addr, Addr2); delay(2); outportb(Superio2_Addr + 1, Value2); delay(2); unsigned char Get_CFG2 (unsigned char Addr2) unsigned char d2; outportb(Superio2_Addr, Addr2); delay(2); d2 = inportb(Superio2_Addr+1); delay(2); WADE-8021 User’s Manual...
  • Page 27 Set_CFG2 (0xCE, 0x0F); /* Port 70~73 Out mode, 74~77 In mode*/ delay (5); /* Read Base Address */ #if DEBUG d2 = Get_CFG2 (0x62); printf ("0x62: %x\n", d2); d2 = Get_CFG2 (0x63); printf ("0x63: %x\n", d2); #endif /* Set GP70~73 Low, 74~77 High GPIO7=a00+6 */ WADE-8021 User’s Manual...
  • Page 28 /* Set GPIO Port In/Out mode */ Set_CFG2 (0xCE, 0xF0); /* Port 70~73 In mode, 74~77 Out mode */ delay (5); /* Set GP70~73 High, 74~77 Low, a+6 */ outportb (0xa06, 0x0F); delay (5); d2 = inportb (0xa06); #ifdef DEBUG WADE-8021 User’s Manual...
  • Page 29 ("GPIO76->GPIO72 test ok !! (pull low)\n"); else printf ("GPIO76->GPIO72 test fail (pull high)\n"); if ((d2 & 0x08) == 0) printf ("GPIO77->GPIO73 test ok !! (pull low)\n"); else printf ("GPIO77->GPIO73 test fail (pull high)\n"); exit_Superio2_CFG (); getch (); return(0); WADE-8021 User’s Manual...

  • Page 30: Chapter 4 Bios Setup Information

    Chapter 4 BIOS Setup Information WADE-8021 uses AMI BIOS structure stored in Flash ROM. These BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods.

  • Page 31: Main

    Use this menu for basic system configurations, such as time, date etc. System Date The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Time The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. WADE-8021 User’s Manual...

  • Page 32: Configuration

    BIOS Setup Information Configuration Use this menu to set up the items of special enhanced features. PCI/PCIE Configuration PCI, PCI-X and PCI Express Settings. WADE-8021 User’s Manual...
  • Page 33 Set Maximum Read Request size of PCI Express Device or allow System BIOS to select the value. Choices: ★Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096 Bytes. Processor PCI Express Configuration Config NB PCI Express Settings WADE-8021 User’s Manual...
  • Page 34 Choices: Disabled, ★Auto, ASPM L0s, ASPM L1, ASPM L0sL1. Enable PEG To enable or disable the PEG Choices: Disabled, Enabled, ★Auto. Detect Non-Compliance Detect Non-Compliance PCI Express Device in PEG Choices: ★Disabled, Enabled. PCH PCI Express Configuration PCH PCI Express Configuration settings WADE-8021 User’s Manual...
  • Page 35 Control the PCI Express Root Port Choices: ★Enabled, Disabled. ASPM PCI Express Active State Power Management settings, [Enable] = Force all link to L0SL1, [Disable] = Disable ASPM Choices: ★Disabled, Enable. PCIe Speed Select PCI Express port speed. Choices: ★Auto, Gen1, Gen2. WADE-8021 User’s Manual...
  • Page 36 Choices: Suspend Disabled, S1 only (CPU Stop Clock), S3 only (Suspend to RAM), ★Both S1 and S3 available for OS to choose from. Restore AC Power Loss Select AC power state when power is re-applied after a power failure. Choices: Power Off, Power On, ★Last State. WADE-8021 User’s Manual...
  • Page 37 Number of cores to enable in each processor package Choices: ★All, 1, 2, 3. Intel Virtualization When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Choices: ★Disabled, Enabled. EIST Enable/Disable Intel SpeedStep. Choices: Disabled, ★Enabled. WADE-8021 User’s Manual...
  • Page 38 Disabled = Azalia will be unconditionally disabled. Enabled = Azalia will be unconditionally Enabled. Choices: Disabled, Enabled, ★Auto. Azalia Internal HDM Enable or Disable internal HDMI codec for Azalia. Choices: ★Disabled, Enabled. VT-d Check to enable VT-d function on MCH. Choices: ★Disabled, Enabled. WADE-8021 User’s Manual...
  • Page 39 Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. Choices: Disabled, ★Enabled. Un-configure ME OEMFlag Bit 15: Un-configure ME without password. Choices: ★Disabled, Enabled. Disable ME Set ME to Soft Temporary Disabled. Choices: ★Disabled, Enabled. WADE-8021 User’s Manual...
  • Page 40 BIOS Setup Information Intel TXT(LT) Configuration (Show only) Intel Trusted Execution Technology Memory Configuration (Show Only) Memory Configuration Parameters WADE-8021 User’s Manual...
  • Page 41 Enable or disable onboard NIC. Choices: ★Enabled, Disabled. Wake on LAN Enable or disable integrated LAN to wake the system. (The Wake On LAN cannot be disabled if ME is on at Sx state.) Choices: ★Enabled, Disabled. 4-10 WADE-8021 User’s Manual...
  • Page 42 Indicates the maximum speed the SATA controller can support. Choices: Default, Gen1, Gen2, ★Gen3. Alternate ID (SATA Mode is “RAID”) Report alternate Device ID Choices: Enabled, ★Disabled. Port 0-1 (SATA Mode is “AHCI” or “Raid”) Enable or Disable SATA Port Choices: Disabled, ★Enabled. 4-11 WADE-8021 User’s Manual...
  • Page 43 Primary Display Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx. Choices: ★Auto, IGFX, PEG, PCIE. Internal Graphics Keep IGD enabled based on the setup options. Choices: ★Auto, Disabled, Enabled. 4-12 WADE-8021 User’s Manual...
  • Page 44 LCD Panel Type Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item. Choices: ★800x480, 800x600, 1024x768, 1280x1024. Panel Color Depth Select the LFP Panel Color Depth Choices: ★18 Bit, 24 bit. 4-13 WADE-8021 User’s Manual...
  • Page 45 This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. Choices: Enabled, ★Disabled. EHCI Hand-Off This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver. Choices: ★Disabled, Enabled. 4-14 WADE-8021 User’s Manual...
  • Page 46 BIOS Setup Information PCH USB Configuration PCH USB Configuration settings USB Port #0-13 Disable USB Port Choices: Disabled, ★Enabled. Super IO Configuration System Super IO Chip Parameters 4-15 WADE-8021 User’s Manual...
  • Page 47 IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12, IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; 4-16 WADE-8021 User’s Manual...
  • Page 48 IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12, IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; 4-17 WADE-8021 User’s Manual...
  • Page 49 Set watchdog timer value Choices: ★Disabled, Enabled. Time Value (Watch Dog Timer “Enabled”) Set WDT Timer value Seconds/Minutes Choices: 10-255, ★20. Time Unit (Watch Dog Timer “Enabled”) Set Timer count unit of WDT Choices: Minute, ★Second. 4-18 WADE-8021 User’s Manual...
  • Page 50 CPU Fan Control Function Choices: Disabled, ★Enabled. CPU Fan Start Fan Start Temperature Choices: 25, 30, 35, 40, 45, 50, 55, 60, 65, ★70. CPU Fan Full Speed Fan Full Speed Temperature Choices: ★60, 65, 70, 75 4-19 WADE-8021 User’s Manual...
  • Page 51 Console Redirection Enable or Disable Choices: ★Disabled, Enabled. Console Redirection Settings (Console Redirection is “Enabled”) The settings specify how the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. 4-20 WADE-8021 User’s Manual...
  • Page 52 Choices: ★None, Hardware RTS/CTS. VT-UTF8 Combo Key Sup Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals Choices: Disabled, ★Enabled. Recorder Mode On this mode enabled only test will be send. This is to capture Terminal data. Choices: ★Disabled, Enabled. 4-21 WADE-8021 User’s Manual...
  • Page 53 Choices: ★Disabled, Enabled. Legacy OS Redirection Resolution On Legacy OS, the number of Rows and Columns supported redirection. Choices: ★80x24, 80x25. Putty KeyPad Select FunctionKey and KeyPad on Putty. Choices: ★VT100, LINUX, XTERMR6, SCO, ESCN, VT400. 4-22 WADE-8021 User’s Manual...

  • Page 54: Boot

    Choices: Do not launch, UEFI only, ★Legacy only. Full Screen Logo Enables or Disables Quiet Boot option and Full screen Logo. Choices: Disabled, ★Enabled. Post Report Post Report Support Enabled/Disabled. Choices: ★Disabled, Enabled. Summary Screen Summary Screen Support Enabled/Disabled. Choices: ★Disabled, Enabled. 4-23 WADE-8021 User’s Manual...
  • Page 55 Set Boot Priority. Choices: CD/DVD, Hard Disk, ★USB Floppy, USB CD/DVD, USB Hard Disk, USB KEY, Network, Disabled. 4th Boot Set Boot Priority. Choices: CD/DVD, Hard Disk, USB Floppy, ★USB CD/DVD, USB Hard Disk, USB KEY, Network, Disabled. 4-24 WADE-8021 User’s Manual...

  • Page 56: Security

    BIOS Setup Information Security Administrator Password Set Setup Administrator Password 4-25 WADE-8021 User’s Manual...

  • Page 57: Save & Exit

    Reset the system after saving the changes. Choices: ★Yes, No. Discard Changes and Exit Reset system setup without saving any changes. Choices: ★Yes, No. Restore Defaults Restore/Load Default values for all the setup options. Choices: ★Yes, No. 4-26 WADE-8021 User’s Manual...

  • Page 58: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting This chapter provides a few useful tips to quickly get WADE-8021 running with success. As basic hardware installation has been addressed in Chapter 2, this chapter will primarily focus on system integration issues, in terms of BIOS setting, and OS diagnostics.

  • Page 59: Bios Setting

    To make sure that you have a successful start with WADE-8021, it is recommended, when going with the boot-up sequence, to hit “DEL” key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.

  • Page 60: Faq

    Question: I forget my password of system BIOS, what am I supposed to do? Answer: You can switch off your power supply then find the JP10 of the WADE-8021 set it from 1-2 open to short and wait 5 seconds to clean your password then set it back to 1-2 open to switch on your power supply.
  • Page 61 5. Execute the zip file to root of the bootable USB pen drive. You can get those“fparts.txt”,”fpt64.efi”,”temp.bin”,”Update.nsh” four files. 6. Insert your USB pen drive in USB port of the WADE-8021 and power-on. 7. Boot to EFI-Shell mode then input the “fs0:” command to switch to the root of the USB pen drive.
  • Page 62 If you have other additional technical information or request which is not covered in this manual, please fill in the technical request form as below hyperlink. http://www.portwell.com.tw/support/problem_report.php We will do our best to provide a suggestion or solution for you. Thank WADE-8021 User’s Manual...

Table of Contents