Schon 67706-0001 Installation And Care Manual page 6

Installation (continued)
5
Attaching the quick connector
to the receiving block
□
Push the quick connector (F) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
F
7
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
6
Installing the weight
□
Install the weight clip (K) at the point of the
hose marking "weight here".
□
Insert the weight (J) onto the clip (K) by sliding
it down onto the clip (K).
J
K
1
2
6
J
K