Pre-Installation Information - sanindusa BASIC Mounting Instructions And Maintenance

//PRE-INSTALLATION INFORMATION

Check contents:
Separate all parts from the packaging and check each part with the "Pack contents" section. Pay
attention to the different models variations. Make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not attempt to install your electronic faucet until
obtain the missing parts.
Warnings:
Do not install the faucet facing a mirror or any other electronic system operated by an infra-red
sensor. To prevent reflection problems, it is recommended to keep a minimum distance of 1,5 meters
between the faucet and any other objects.
Preparation for installation:
Flush water supply lines thiriughly before installing the faucet. Do not allow dirt, Teflon tape or metal
particles to enter the faucet. Shut off water supply.
Important:
All plumbing is to be installed in accordance with applicable codes and regulations.
42//43