Arjohuntleigh MultiClean Quick Reference Manual

QUICK REFERENCE GUIDE - USE
MultiClean

Set disinfection concentration

1
A
B
Unlock and open the door (A).
Verify that there is a bottle of
cleaner or disinfectant on the
shelf inside (B).
6
A
Press the trigger on the spray
handle (A).
2 3
A
Open the water supply (A).
7 8
Check the liquid value on the To adjust the mix: Use adjustment
flowmeter setting. Make sure screw on the bottle conntector -
the mix is correct when starting screw clockwise to decrease,
disinfection. (See the IFU for anticlockwise to increase.
the MultiClean.)
08.BP.01EN_01 • 08/2020 • Page 1/2
4
A
Switch the unit on (A). Remove the spray handle from
the holder. Direct it away from
you.
9
Put the spray handle back in its
holder (A).
5
A
A
Turn the function selection
control to disinfect (A). Yellow =
disinfect.
10
A
A
B
Close and lock the door (A).
Switch the unit off (B).