Summary of Contents for Fusion TC500
- Page 1 Recon 3 Multi Use Thermal Optic Monocular & Day Scope Clip-On Model: TC500 User Manual Fusion Thermal, LLC www.fusionthermal.com...
-
Page 2: Table Of Contents
Contents 1. Description ..........................3 2. Components and Controls......................4 2.1 Components .......................4 2.2 Controls........................5 3. Menu/Status Bar Icons......................6 4. Specifications.........................7 5. System Features........................8 6. Operation System........................8 6.1 Power on / Power off ....................8 6.2 Standby Mode ......................8 6.3 Status bar........................9 6.4 Shortcut Menu......................9 6.5 Advanced Menu .......................10 6.6 Blind Pixel Repair Feature..................11 6.7 Compass Calibration ....................12... -
Page 3: Description
1. Description The Fusion Thermal Recon 3 is a multi use thermal optic that is supplied with two different kinds of eyepieces, one which allows the unit to be used as a hand-held monocular, and a second which allows the unit to be used as an attachment in front of a traditional day scope, a role commonly refered to as a Clip-On. -
Page 4: Components And Controls
2. Components and Controls Fig. 2.1 Function Introduction 2.1 Components No. Name Function description ① Lens Cap Lens protection device. ② Objective Lens Premium Germanium lens for the ultimate in thermal performance. ③ Target Focus Ring Adjustable focus ring to bring your viewed subject into sharp focus. -
Page 5: Controls
⑧ Clip-On Eyepiece Clip-on eyepiece used to place the unit in clip-on (Clip-On Mode Only) mode and ready the unit for use in front of your day scope. ⑨ Clamping Ring Used to lock the adapter ring between the thermal unit (Clip-On Mode Only) and the day scope. -
Page 6: Menu/Status Bar Icons
Enter Button distance between increase stadiametric measurement bars —— rangefinder M (13) Exit interface Button C (14) Reduce the Quickly Button distance reduce measurement bars Under the shortcut menu, short press to switch functions; Under the advanced menu, short press to switch the parameter options. -
Page 7: Specifications
4.Specifications Model Recon 3 Detector Parameters Detector Type VOx Uncooled Resolution 384*288 Pixel Size 17um ≤50mk NETD Frame Rate 50Hz Optics Parameters Objective Lens 42 mm Field of View 8.9° ×6.7° 3-Step Magnification Monocular: 3X Optical, 6X Digital, and 12X Digital Diopter Adjustment -5D～+5D Detection Range... -
Page 8: System Features
Physic Parameters IP Rating IP67 ＜14.8 oz. Weight (without batteries) 6.0“ x 2.4“x2.3‘ Dimension Adapter Ring M52×0.75 5. System Features ● Quick conversion between clip-on mode and monocular mode; ● Quick mounting and removal of clip-on to day scope; ● Detection range up to 2300 yards, recognition up to 800 yards; ●... -
Page 9: Status Bar
6.3 Status bar There is a status bar located at the bottom of the viewer screen. It displays informaiton on important settings and operations, including: Image Color Mode, Screen Brightness Level, Gun Profile, Bluetooth, Ultraclear Mode, Video Out, Battery Status. Note: Not all icons will appear at all times. -
Page 10: Advanced Menu
6.5 Advanced Menu Long press the M (13) button for 3s to enter the advanced menu interface (fig. 6-2). From top to bottom the function options are Ultraclear mode, Bluetooth, Video Out, Battery Type, Gun Profile, Blind Pixel Correction, and Factory Reset, referring to table 6-1 for details. Operations: ➢... -
Page 11: Blind Pixel Repair Feature
Used to link with Bluetooth Displays on Bluetooth ON/OFF remote control, included. the status bar. Transfer the analog video in Video Displays on ON/OFF pal through the Type-C data Output the status bar cable. —— 3.7v is selected for Battery 3V/3.7V rechargeable batteries, and 3V Type... -
Page 12: Compass Calibration
Fig. 6-3 Blind Pixel Correction Interface 6.7 Compass Calibration • Long press M (13) button to enter advanced menu; • Under the advanced menu, rotate the unit 360° 3 times around the optical axis to enter the compass calibration interface, rotate in the direction as shown in fig. 6-4. Fig. -
Page 13: Point-Of-Impact Fine Tuning (Clip-On Mode Only)
• During the calibration process, short press Power (12) button to exit the compass calibration interface at any time. Fig. 6-5 Compass Calibration Interface 6.8 Point-of-Impact Fine Tuning (Clip-On Mode Only) The viewing screen of your thermal unit was perfectly centered at the factory during production. -
Page 14: Stadiametric Rangefinder (Monocular Mode Only)
screen a little at a time, a long press will move it faster. ➢ After completing your screen repositioning, long press M (13) button to save and exit. If you want to memorize your screen repositioning first select one of the four Gun Profiles: G1, G2, G3, G4. -
Page 15: Bluetooth Remote Control Connecting
• Deer - height 5.5‘ ➢ Aim at the target, and then adjust the distance between the measurement bars by pressing Power (12) button or C (14) button until the target matches entirely between the two bars. Power (12) button is used to increase the distance and C (14) button to reduce the distance. -
Page 16: Product Cleaning And Maintenance
➢ Please do not use batteries of different types or batteries with various charge levels. ➢ After installation, please set the battery type in the advanced menu for the first starting up--choosing 3.7V for rechargeable battery and 3V for ordinary battery (according to the instructions of the section 6.5), otherwise the battery level indication will be inaccurate and may be interrupted during operation. -
Page 17: General Trouble Shooting
8. General Trouble Shooting Table 8.1 General trouble shooting Trouble description Probable reason Trouble shooting Adjust the Target Focus Subject or viewing screen Ring or Eyepiece Focus out of focus; Ring. Blurred Images No image correction for a Perform Shtter or long time. -
Page 18: Appendix
9. Appendix 9.1 User Interface Description • Custom interface and data cable are adopted to support type-c power supply, serial port and PAL video; • Support type-c and battery power supply, support over-voltage and under-voltage reverse connection protection. 9.2 Product Dimensions 9.2.1 Boundary Dimension... -
Page 19: Bottom Mounting Hole Size
9.2.2 Bottom Mounting Hole Size... - Page 20 FUSION THERMAL, LLC PRODUCT REGISTRATION CARD PRODUCT INFORMATION Product Name _________________________ Purchase From ____________________________ Purchase Date _________________________ Product Serial # ___________________________ CUSTOMER INFORMATION Name ____________________________________________________________________________ Address __________________________________________________________________________ City____________________________ Country ____________________ Zip __________________ Day Phone # _________________________________ Home Phone #_________________________ E-mail address_____________________________________________________________________ ............................
Need help?
Do you have a question about the TC500 and is the answer not in the manual?
Questions and answers