Page 1
TEAMWORK DEFINED BY QUALITY BUILDING LONG LASTING RELATIONSHIPS TECHNOLOGY DESIGNED BY REAL EXPERTS ScanAvenger Wireless / Bluetooth / USB 1D/2D Barcode Scanner Page 1 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Do not disassemble the device or remove the seal label from the device as this will void the warranty. Regarding to the product modification and update, cCheck Pty. Ltd reserves the right to make changes to software or product to improve reliability, function, or design at any time without notice.
Please scan all the below barcodes in order. This will reset the scanner to the default factory settings including software updates and customizations for your scanner. Step 1 Step 2 1. TTL/RS232 2. 9600 Step 3 Page 8 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Step 13 version Use the scanner to scan the version number bar code, you can view the current bar coder version number information version Page 10 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
There are three levels of volume level to choose from, default: passive medium frequency Active Medium Frequency Passive low frequency * Passive Medium Frequency Passive High Frequency Page 11 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Do Not Beep after Good Decode Startup Beep If startup beep is enabled, the engine will beep after being turned on. *Enable Startup Beep Disable Startup Beep Page 12 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Users can set it to one of the following states according to the application environment: *Turn on Illumination Turn off Illumination Page 13 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
The default is to turn on the aiming light. *Trun on Aiming light Trun off Aiming light Page 14 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
* Global area Modify the size of the central area Page 15 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
When the bar code appears to flip, it can scan the corresponding settings code into the mirror flip mode. Trun on image Flipping(Support normal * Trun on image Flipping(Only support and flip) normal) Page 16 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
GBK or UTF-8. The output defaults to GBK format. If you need UTF-8 Chinese output format, please read the following settings. *GBK UTF-8 Unicode(Big) Unicode(Little) VAT invoice automatic identification output function Enable *Disable Page 18 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
The user can set the barcode scanner function by scanning one or more setting barcodes. Users can choose to use USB-KBW, USB-COM, TTL / RS232 serial communication interface mode. Page 19 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
2. Scan the data code "5" according to "Appendix-Data Code". 3. Finally, scan the "Save Settings" bar code of "Appendix-Save and Cancel Settings" to complete the settings. Page 20 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
When using Linux system, the device is / dev / hidrawx. If the HID device accessed by the system only has this device, then: / dev / hidraw0. Page 24 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
When using Linux system, the device is / dev / ttyACMx and X is the device number. If only one USB COM device is connected to the system, it is: / dev / ttyACM0. Page 25 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Serial Default :Rate 9600bps; Data 8, Stop 1, Paity none. TTL/RS232 Parameter default Serial Communication Type Standard TTL/RS232 Baud Rate 115200 Parity Type None Data Bits Stop Bits Page 26 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 27
1200 4800 9600 19200 38400 57600 *115200 Data Bit, Stop Bit, Check Bit Default 8-bit data bit, 1-bit stop bit, no check bit Page 27 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
If the reading time is longer than a single reading time, the reading will be finished. *Trigger Mode Page 28 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Continuous output with same code without interval * Continuous output of the same code, 0.5 Continuous output of the same code, 1 seconds interval seconds interval Page 30 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
In this mode, clicking the trigger button can also start reading. Sense Mode Page 31 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
(Selection of very Dark Environment) A little High sensitivity General sensitivity ( Selection of Dark Environment ) ( Selection of General Indoor Environment ) Low sensitivity Page 32 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
The method of adding prefixes and suffixes , can meet the requirement and need to modify the contents of the barcode information. Note: Data editing format: <Code ID>< Custom Prefix > <barcode data> <custom suffix > <suffix> Page 33 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
"Code 128 ID: 06-123456", you can know that the barcode type is: code 128, code ID is: hexadecimal 06. Transmit Code ID *Not Transmit Code ID Page 34 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
"Appendix-Data Code" to scan the barcode corresponding to the number one by one. Step 4: Repeat step three to add more prefix and suffix characters. Page 35 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
When the suffix is deleted, the terminator suffix is also deleted. Delete the prefix of all codes delete the suffix of all codes Page 36 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
ID hexadecimal data is 06, and the corresponding two data barcodes "0" and "6" can be scanned. Step 3 Scan the "Save Settings" bar code of "Appendix-Save and Cancel Settings" to complete the configuration Hidden character Page 37 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Modify Header Field Length The operation steps are as follows: Page 38 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 39
3. Scan the "0" and "6" barcodes of "Appendix-Data Code" in turn. 4. Scan the "Appendix-Save and Cancel Settings" save settings bar code; 5. Scan the "Transfer Header Fields" bar code. Complete the configuration. Page 39 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
5. Scan the "0" and "1" barcodes of "Appendix-Data Code" in turn. 4. Scan the "Appendix-Save and Cancel Settings" save settings bar code; 5. Scan "Transfer Intermediate Field" barcode. Complete the configuration. Page 40 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
3. Scan the "0" and "6" barcodes of "Appendix-Data Code" in turn. 4. Scan the "Appendix-Save and Cancel Settings" save settings bar code; 5. Scan the "Transfer Tail Fields" bar code. Complete the configuration. Page 41 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
, prefix and other contents can be formatted, but suffix of end character can’t make it. Add CR* Delete CR Add LF Delete LF AddTab DeleteTab Page 42 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Upper(Capitalize) Lower(All lowercase) Inverse(Case inversion) Note: This parameter is only valid in standard keyboard input mode and keyboard emulation input control character mode. Page 43 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
If the Disable 1D Symbologies feature is enabled, the engine will not be able to read any 1D barcodes. Enable 1D Symbologies Disable 1D Symbologies Page 44 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
13 characters, and the default is to transmit the check bit. * Transfer Check Bit Not Transfer Check Bit Page 45 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 46
The default is to turn off extra bits. UPC-A Add-on Code Users can do additional setting by scanning following UPC-A code Enable 2-Digit add-on Code Disable 2-Digit add-on Code* Page 46 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
8 characters, and the default is not to transmit the check bit. Transfer Check Bit *Not transfer Check Bit Page 48 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 50
EAN-8 bar code data is fixed to 8 characters, and the 8th bit is the check bit. It is used to check the correctness of all 8 characters. The default is to transmit the check bit. Not transfer Check Bit *Transfer Check Bit Page 50 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 52
13 characters. The default is to transmit the check bit. *Transport check bits Not Transfer check bits Page 52 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Code 128 is 0 by default, and the maximum length is 80. Code 128 Maximum Length Settings Code 128 Minimum Length Settings GS1-128(UCC/EAN-128) Enable/Disable GS1-128 *Enable GS1-128 Disable GS1-128 Page 54 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 55
Users can set the code 128 within a specific length range (1-80) to decode. The minimum length of Code 128 is 0 by default, and the maximum length is 80. GS1-128最小长度设置 GS1-128最大长度设置 Page 55 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
The failure of the check will prompt the failure of reading the code. *No check Check and transmit check bits Check bits are not transmitted Page 56 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 57
ASCII characters by default,by setting, you can turn on the function of reading full ASCII characters,default Enable all ASCII characters. *Disable Code 39 Full ASCII Enable Code 39 Full ASCII Page 57 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Code 93 is 0 by default, and the maximum length is 80. Code 93 Minimum Length Settings Code 93 Maximum Length Settings Page 58 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Code 11 is 4 by default, and the maximum length is 80. Code 93 Minimum Length Settings Code 93 Maximum Length Settings Page 59 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Users can set up to decode Interleaved 2 of 5 in a specific length range (2-80). The minimum length of Interleaved 2 of 5 defaults to 4 and the maximum length is 80. Page 60 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Matrix 2 of 5 defaults to 4 and the maximum length is 80. Matrix 2 of 5 Maximum Length Settings Matrix 2 of 5 Minimum Length Settings Page 61 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Industrial 2 of 5 & Standard 2 of 5 Industrial 2 of 5 & Standard 2 of 5 Maximum Length Settings Minimum Length Settings Page 62 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
4, and the maximum length is 60. Codabar Minimum Length Settings Codabar Maximum Length Settings Enable/Disable MSI Page 63 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 64
Validate type 10 then type 11 char,but Validate type 10 then type 11 char,and don’t transmit transmit Disable MSI check MSI Recognition Length Page 64 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 65
Users can set the MSI within a specific length range (4-48) to decode. The minimum length of MSI is 4 by default, and the maximum length is 48. MSI Minimum Length Settings MSI Maximum Length Settings Page 65 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Disable QR Code Data Matrix Enable/Disable Data Matrix *Enable Data Matrix Disable Data Matrix PDF 417 Enable/Disable PDF 417 *Enable PDF 417 Disable PDF 417 Page 68 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Or send through hexadecimal instructions in the following format: Command sending is 5E 5F 5E 53 43 414E 2E Command sending is 5E 5F 5E 53 4C 45 50 2E Page 70 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 71
Note: Open scan default timeout time is 8S Page 71 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 72
Command sending is 5E 5F 5E 53 55 46 41 44 44 30 36 33 39 33 39 2E The final output data is "Ab123mn99" Page 72 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Send hexadecimal command to control scan, send open scan command: 5E 5F 5E 53 43 41 4E 2E Note: For detailed commands, please refer to Appendix-Command Table. Page 73 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Serial Port Baud Rate 无校验 Serial port check 8个 Serial data bits 1位 Serial Port Stop Bit Reading mode Reading mode Trigger mode Page 74 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 75
Transfer system character UPC-A to EAN-13 Enable 2-Digit add-on Code Enable 5-Digit add-on Code 2-Digit Add-on Code Required 5-Digit Add-on Code Required UPC-E Enable Page 75 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
18. Reading Area - Center 20% IMGREG4. 19. Reading Area - Center 40% IMGREG3. 20. Read Area - Center 60% IMGREG2. IMGREG1. 21. Reading Area - Center 80% Page 80 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 81
48. Continuous Reading Model SCMCNT. 49. Continuous Read Mode - Same Bar Code CNTALW0. Output Only Once 50. Continuous Reading Mode Continuous CNTALW1. Page 81 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 82
69. Transfer header field SECSTR. 70. Transfer intermediate fields SECCEN. 71. Transfer tail field SECEND. 72. Modify header field length Custom SECSNB. Settings Page 82 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Allowing Data Matrix to be read DMCENA1. Default 205. Prohibit reading Data Matrix DMCENA0. 206. PDFENA1. Default Permission to read PDF 417 207. Page 87 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 88
MCFENA1. Default 209. Prohibit reading Micro PDF 417 MCFENA0. 210. Allow Aztec to be read AZTENA1. 211. Prohibit reading Aztec AZTENA0. Default 212. Page 88 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Appendix - Digit Barcodes The parameter requires the exact value Scan the appropriate digital setting code. Page 89 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 90
Page 90 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 91
Appendix - Character List Serial character 1D Setup Code 2D Setup Code number Page 91 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 92
Back Space Page 92 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 93
Page 93 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Page 94
Right Arrow Left Arrow Up Arrow Down Arrow Page 94 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
Appendix – Save and Cancel BarCodes Change the selection or cancel an incorrect input and scan the bar code below. Save Cancel Page 107 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...
DC4 (Device Control 4) NAK (Negative Acknowledgment) SYN (Synchronous Idle) ETB (End of Trans. Block) CAN (Cancel) EM (End of Medium) SUB (Substitute) Page 108 of 112 cCheck Pty Ltd Level 9, 2 Claremont Street, South Yarra, 3141 E: helpdesk@ccheck.global...