Controlling Speaker Output - Creative Inspire GD580 User Manual

English.book Page 4 Friday, August 1, 2003 12:04 PM
Controlling Speaker
Output
When playing back multichannel programs like Dolby Digital or DTS soundtracks, you may want to set
the speaker output level to suit your sitting position relative to the speakers. This is to obtain the desired
(balanced) output required for multichannel playback from all speakers.
1. Press the SELECT button on the decoder until the LED of the channel you want lights up.
Volume
knob
Figure 4-1: Selecting the channel volume.
2. Turn the volume knob clockwise to increase the selected channel volume or counterclockwise to
decrease the selected channel volume.
The LED indicators on the front of the decoder (see Figure 4-2) indicate the volume selected.
The more lit indicators there are, the higher the volume.
Low volume
Figure 4-2: LED volume indicators.
If the volume setting in any of the three channel levels — Center, Rear or Subwoofer — remains
unchanged for 2–3 seconds, the master volume control resumes.
Note: The volume is set relative to the front speakers.
High volume
Selecting Mode and Controlling Speaker Output 4-4