Samsung ME11A7510 Series Instruction Manual page 14

Step-by-step installation guide
The marked Brackets should have
Vent holes.
C. Outside back exhaust (horizontal duct)
C1. Adapting the COVER PANEL for outside back exhaust
14 English
Install_ME11A7510DG_AC_DE68-04709B-00_EN+CFR.indb 14 Install_ME11A7510DG_AC_DE68-04709B-00_EN+CFR.indb 14
NOTE
• The Exhaust Adaptor with
the Damper is not needed for
recirculating type. You may want to
save them for possible future use.
• You must check bracket picture
according to ventilation type at page
12.
1. Make sure the Cover Panel is
assembled properly. (Top assembly)
2.
Plate
8EA
After removing Plates
You must check bracket picture according
to ventilation type at page 12.
The marked Brackets should not
have Vent holes.
Cut 8 area to remove plates using
nipper.
NOTE
2021-06-16 2021-06-16 11:00:51 11:00:51