Advertisement
Table of Contents
About Us
We appreciate your business!
Congratulations on your new SAWYER product. We are proud to
have you as our customer and will strive to provide you with the best
service and reliability in the industry. This product is backed by our
extensive warranty and world-wide service network. To locate your
nearest distributor or service agency, please contact us at the phone
number and address listed on the bottom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design
and manufacture of pipeline and welding equipment and has been
since 1948. Sawyer equipment has become a standard in the industry
and continues to set the benchmark for quality and durability.
This user operation manual has been made to instruct you for the best
use and operation of your Sawyer product. Your satisfaction with our
products is our main goal. Please read this entire manual carefully,
noting all tips, notes and warnings. Safety always comes first.
Parts Diagram
E
D
Record the following information for warranty purposes:
Where purchased:________________________________________________
Purchase date:___________________________________________________
Equipment Serial #:_______________________________________________
A
B
C
A. Band Handle
B. Latch Anchor
C. Latch Handle
All products manufactured by or for Sawyer Manufacturing Company are
guaranteed against defects due to faulty workmanship or materials for twelve
This guarantee is limited to the repair or replacement of any parts found to be
defective, and no other liability–expressed, implied, or contingent–is assumed.
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
P
918.834.2550
F
918.834.0318
sawyermfg.com
info@sawyermfg.com
V1.2
Beveling Bands
Manual
Models 206C & 206D
D. Latch Base Assembly
E. Locating Pin
Warranty
months from the date of purchase.
Advertisement
Table of Contents
Summary of Contents for MFG SMC SAWYER 206C
- Page 1 About Us We appreciate your business! Congratulations on your new SAWYER product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our Beveling Bands extensive warranty and world-wide service network.
- Page 2 Installation Open band by pulling up on latch handle (C, Fig. 1) assembly free from latch anchor. (B, Fig. 1) Fig. 1 Release band from latch base assembly. (D, Fig. 2) Fig. 2 Place band on pipe to be beveled. (Fig. 3) Fig.
Need help?
Do you have a question about the SMC SAWYER 206C and is the answer not in the manual?
Questions and answers