Do you have a question about the Classic and is the answer not in the manual?
Questions and answers
Jack McHenry
April 18, 2025
how do I remove mail box from the post
2 comments:
Jack McHenry
April 18, 2025
@Jack McHenry
Mr. Anderson
May 9, 2025
The context does not provide specific instructions for removing a Rubbermaid Classic mailbox from the post. However, based on standard mailbox installation, you would typically:
1. Locate and remove the screws that attach the mailbox to the post or mounting bracket. 2. Lift the mailbox off the post once it is detached.
If the mailbox is enclosed or mounted differently, additional steps may be needed.
Page 1
MAILBOX & POST COMBO Instructional Video/ Vídeo de instrucciones Direct Link/ Enlace Directo: "http://www.youtube.com/watch?v=m280F_lRSGI" INSTALLATION INSTRUCTIONS / INSTRUCCIONES DE INSTALACION Search/ Buscar: "Gibraltar Classic "CL1" mailbox assembly instructions" Classic ™ WARNING: CHECK FOR UNDERGROUND CABLES OR PIPES BEFORE DIGGING. ADVERTENCIA: VERIFIQUE QUE NO HAYA CABLES NI TUBOS SUBTERRÁNEOS ANTES DE CAVAR.
Page 2
STEP 3. Dig a hole and install 40”- 48” treated 4x4 post (not included). Follow manufacturers instructions on using concrete PASO 3. Cave un agujero e instale un poste tratado de 101.6 a 121.8 cm (40 a 48 in) de largo, y 10 x 10 cm (4 x 4 in) de espesor (no incluido). Siga las instrucciones del fabricante para usar el hormigón.
Need help?
Do you have a question about the Classic and is the answer not in the manual?
Questions and answers
how do I remove mail box from the post
@Jack McHenry
The context does not provide specific instructions for removing a Rubbermaid Classic mailbox from the post. However, based on standard mailbox installation, you would typically:
1. Locate and remove the screws that attach the mailbox to the post or mounting bracket.
2. Lift the mailbox off the post once it is detached.
If the mailbox is enclosed or mounted differently, additional steps may be needed.
This answer is automatically generated