Advertisement
Quick Links
Advertisement
Summary of Contents for AccessPRO XBSPKCBOXDC
- Page 1 XBSPKCBOXDC...
- Page 3 12F629 PIC16F57 INPUR 220V Setting transmitter code: ress " LEARN BUTTON" once, the " LEARN LED" light, then, press the button you choose on transmitter till the " LEARN LED " flash and go out. Now, the transmitter is coded, Other transmitters can be coded as this way. Earsing transmitter codes: Press"LEARN BUTTON"...
- Page 4 Auto-close " OFF" The function of auto- closing boom is unabled " ON" The function of auto- closing boom is enabled If selecting" ON"( auto- closing boom function), the delay time of auto- closing can be adjusted by this regulation- resistance. Clockwise is more, Auticlockwise is less.
- Page 5 Safety opening Photocell(N.C.) Photocell input must 1.When the barrier is closing, if the be bridged if not used photocell ray is shut off ,the barrier opens instantly. 2.When the barrier is open, the barrier keeps OPEN status if the Photocell ray is shut off. Loop Detector(N.C.) 1.When the barrier is Closing, if a PHOTOCELL...
-
Page 6: Limit Switch
Limit switch " , " " for the magnetic limit " " " switch on motor “CL”,”GND” for close limit. “OL”,”GND” for open limit. Change the mode from “Closing to Left” to “Closing to Right”, the Cable of Limit(CL,OL) must be exchange. Connect motor and light "... -
Page 7: Troubleshooting
Trouble Shooting *Check power supply *No power supply *Change fuse *Break fuse *Change the motor *Motor is damaged *Photocell is not connected *Connect the photocell properly properly Can open *Photocell team is block *Clear out obstacle but can not close off.