Table of Contents
Advertisement
Note:
When the PC is running on Win 7, there is a possibility that there will be no USB disk prompt box. In this
case, please proceed as follows:
•
Go to Windows ➔ Device Manager ➔ Universal Serial Bus Controller.
•
Unplug and re-plug the USB cable until the driver is detected when GMD is connected.
•
Uninstall it and then retry the upgrade steps. This problem does not exist when the PC is using
Win10.
Factory Reset the GMD1208
Users could restore factory default settings Using a small pin to press the button Reset button on the back
panel of GMD1208 for more than 10 seconds to reboot and restore to factory reset.
•
The Working Station Indicator will be flashing in yellow and then GMD1208 restarts.
•
After the RESET, the Working Station Indicator LED light is solid green (2.4G) or solid blue (BT),
and the mute light is fast blinking green.
GMD1208 User Guide
Version 1.0.1.31
P a g e
|
31
Advertisement
Table of Contents
