Westfalia 69 86 96 Instruction Manual page 15

Using
Application/How to use
The indoor marten repeller repels martens by means of an
acoustic signal with a frequency of around 12 kHz in
intervals of 12 seconds. This frequency is unbearable for
martens and they avoid areas where the appliance has
been placed. The device is suitable for garages, attics,
barns, stables, stacks, etc.
Using
Plug the power cord (1) of the indoor marten repeller into
a wall socket. The device instantly starts operating. This is
indicated by the shining red LED indicator (2) on the top
side of the housing. The acoustic signal is spread straight
from the device. So avoid placing the indoor marten
repeller behind obstacles such as curtains or furniture
which would deflect the sound waves. If necessary, select
a different location for installing the device. In any case,
the indoor marten repeller should be installed as close as
possible to the area to be protected.
During operation, an acoustic signal with a frequency of
around 12 kHz and a duration of 12 seconds is emitted in
intervals of 12 seconds from the sound outputs (3) on the
top side of the housing. At the same time the LED
indicator lights up. During the pauses, the LED is off.
11